This is the latest recevied telemetry packets stored in our database for station/object SP5UID-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750336917 | 5 Count | 730 Count | 0 Count | 0 VDC | 0 VDC |
| 1750335116 | 4 Count | 599 Count | 0 Count | 0 VDC | 0 VDC |
| 1750333315 | 3 Count | 425 Count | 0 Count | 0 VDC | 0 VDC |
| 1750331514 | 2 Count | 330 Count | 0 Count | 0 VDC | 0 VDC |
| 1750327926 | 0 Count | 114 Count | 0 Count | 0 VDC | 0 VDC |
| 1750326124 | 5 Count | 1002 Count | 0 Count | 0 VDC | 0 VDC |
| 1750324323 | 4 Count | 850 Count | 0 Count | 0 VDC | 0 VDC |
| 1750322522 | 3 Count | 678 Count | 0 Count | 0 VDC | 0 VDC |
| 1750320721 | 2 Count | 504 Count | 0 Count | 0 VDC | 0 VDC |
| 1750317119 | 0 Count | 159 Count | 0 Count | 0 VDC | 0 VDC |
| 1750315318 | 11 Count | 1049 Count | 0 Count | 0 VDC | 0 VDC |
| 1750313517 | 10 Count | 882 Count | 0 Count | 0 VDC | 0 VDC |
| 1750311716 | 9 Count | 739 Count | 0 Count | 0 VDC | 0 VDC |
| 1750309915 | 8 Count | 646 Count | 0 Count | 0 VDC | 0 VDC |
| 1750308113 | 7 Count | 594 Count | 0 Count | 0 VDC | 0 VDC |
| 1750306324 | 6 Count | 547 Count | 0 Count | 0 VDC | 0 VDC |
| 1750304523 | 5 Count | 499 Count | 0 Count | 0 VDC | 0 VDC |
| 1750302722 | 4 Count | 448 Count | 0 Count | 0 VDC | 0 VDC |
| 1750300921 | 3 Count | 397 Count | 0 Count | 0 VDC | 0 VDC |
| 1750299119 | 2 Count | 344 Count | 0 Count | 0 VDC | 0 VDC |
| 1750297318 | 1 Count | 271 Count | 0 Count | 0 VDC | 0 VDC |
| 1750295517 | 0 Count | 131 Count | 0 Count | 0 VDC | 0 VDC |
| 1750293716 | 6 Count | 1029 Count | 0 Count | 0 VDC | 0 VDC |
| 1750273917 | 3 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1750270315 | 1 Count | 335 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)