This is the latest recevied telemetry packets stored in our database for station/object SQ5CZL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791592679 | 50 Count | 46 Count | 33 Count | 0 VDC | 0 VDC |
| 1791591778 | 47 Count | 43 Count | 31 Count | 0 VDC | 0 VDC |
| 1791579192 | 7 Count | 7 Count | 5 Count | 0 VDC | 0 VDC |
| 1791578291 | 4 Count | 5 Count | 3 Count | 0 VDC | 0 VDC |
| 1791577390 | 1 Count | 2 Count | 1 Count | 0 VDC | 0 VDC |
| 1791575587 | 860 Count | 999 Count | 647 Count | 0 VDC | 0 VDC |
| 1791574686 | 857 Count | 997 Count | 645 Count | 0 VDC | 0 VDC |
| 1791573786 | 854 Count | 995 Count | 643 Count | 0 VDC | 0 VDC |
| 1791571982 | 848 Count | 989 Count | 639 Count | 0 VDC | 0 VDC |
| 1791571081 | 845 Count | 987 Count | 637 Count | 0 VDC | 0 VDC |
| 1791570179 | 842 Count | 984 Count | 635 Count | 0 VDC | 0 VDC |
| 1791569278 | 839 Count | 981 Count | 633 Count | 0 VDC | 0 VDC |
| 1791568377 | 836 Count | 978 Count | 631 Count | 0 VDC | 0 VDC |
| 1791566574 | 822 Count | 965 Count | 619 Count | 0 VDC | 0 VDC |
| 1791565673 | 819 Count | 962 Count | 617 Count | 0 VDC | 0 VDC |
| 1791563870 | 813 Count | 957 Count | 613 Count | 0 VDC | 0 VDC |
| 1791562969 | 810 Count | 954 Count | 611 Count | 0 VDC | 0 VDC |
| 1791562098 | 807 Count | 951 Count | 609 Count | 0 VDC | 0 VDC |
| 1791561197 | 804 Count | 948 Count | 607 Count | 0 VDC | 0 VDC |
| 1791560295 | 801 Count | 945 Count | 605 Count | 0 VDC | 0 VDC |
| 1791559394 | 798 Count | 942 Count | 603 Count | 0 VDC | 0 VDC |
| 1791558493 | 795 Count | 939 Count | 601 Count | 0 VDC | 0 VDC |
| 1791557592 | 792 Count | 936 Count | 599 Count | 0 VDC | 0 VDC |
| 1791556691 | 784 Count | 928 Count | 592 Count | 0 VDC | 0 VDC |
| 1791555789 | 775 Count | 919 Count | 584 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)