This is the latest recevied telemetry packets stored in our database for station/object MB7USU-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791555609 | 2 Count | 2 Count | 2 Count | 0 VDC | 0 VDC |
| 1791548406 | 944 Count | 828 Count | 828 Count | 0 VDC | 0 VDC |
| 1791543004 | 798 Count | 685 Count | 685 Count | 0 VDC | 0 VDC |
| 1791537602 | 782 Count | 672 Count | 672 Count | 0 VDC | 0 VDC |
| 1791535809 | 780 Count | 671 Count | 671 Count | 0 VDC | 0 VDC |
| 1791534008 | 778 Count | 670 Count | 670 Count | 0 VDC | 0 VDC |
| 1791532208 | 776 Count | 669 Count | 669 Count | 0 VDC | 0 VDC |
| 1791530407 | 774 Count | 668 Count | 668 Count | 0 VDC | 0 VDC |
| 1791528606 | 773 Count | 668 Count | 668 Count | 0 VDC | 0 VDC |
| 1791526806 | 770 Count | 666 Count | 666 Count | 0 VDC | 0 VDC |
| 1791525005 | 768 Count | 665 Count | 665 Count | 0 VDC | 0 VDC |
| 1791523204 | 766 Count | 664 Count | 664 Count | 0 VDC | 0 VDC |
| 1791521403 | 764 Count | 663 Count | 663 Count | 0 VDC | 0 VDC |
| 1791519603 | 762 Count | 662 Count | 662 Count | 0 VDC | 0 VDC |
| 1791517802 | 759 Count | 660 Count | 660 Count | 0 VDC | 0 VDC |
| 1791516001 | 757 Count | 659 Count | 659 Count | 0 VDC | 0 VDC |
| 1791514208 | 755 Count | 658 Count | 658 Count | 0 VDC | 0 VDC |
| 1791512408 | 753 Count | 657 Count | 657 Count | 0 VDC | 0 VDC |
| 1791510607 | 751 Count | 656 Count | 656 Count | 0 VDC | 0 VDC |
| 1791508806 | 748 Count | 654 Count | 654 Count | 0 VDC | 0 VDC |
| 1791507006 | 746 Count | 653 Count | 653 Count | 0 VDC | 0 VDC |
| 1791505205 | 744 Count | 652 Count | 652 Count | 0 VDC | 0 VDC |
| 1791472800 | 503 Count | 429 Count | 429 Count | 0 VDC | 0 VDC |
| 1791469208 | 499 Count | 427 Count | 427 Count | 0 VDC | 0 VDC |
| 1791465607 | 495 Count | 425 Count | 425 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)