This is the latest recevied telemetry packets stored in our database for station/object F4FWW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779725286 | 302 Count | 141 Count | 141 Count | 0 VDC | 0 VDC |
| 1779723485 | 300 Count | 140 Count | 140 Count | 0 VDC | 0 VDC |
| 1779716282 | 292 Count | 136 Count | 136 Count | 0 VDC | 0 VDC |
| 1779714481 | 290 Count | 135 Count | 135 Count | 0 VDC | 0 VDC |
| 1779712681 | 288 Count | 134 Count | 134 Count | 0 VDC | 0 VDC |
| 1779710880 | 287 Count | 134 Count | 134 Count | 0 VDC | 0 VDC |
| 1779709079 | 285 Count | 133 Count | 133 Count | 0 VDC | 0 VDC |
| 1779707279 | 284 Count | 133 Count | 133 Count | 0 VDC | 0 VDC |
| 1779703683 | 280 Count | 131 Count | 131 Count | 0 VDC | 0 VDC |
| 1779701882 | 279 Count | 131 Count | 131 Count | 0 VDC | 0 VDC |
| 1779700082 | 277 Count | 130 Count | 130 Count | 0 VDC | 0 VDC |
| 1779698281 | 276 Count | 130 Count | 130 Count | 0 VDC | 0 VDC |
| 1779696480 | 275 Count | 130 Count | 130 Count | 0 VDC | 0 VDC |
| 1779694680 | 274 Count | 130 Count | 130 Count | 0 VDC | 0 VDC |
| 1779692879 | 273 Count | 130 Count | 130 Count | 0 VDC | 0 VDC |
| 1779691078 | 271 Count | 129 Count | 129 Count | 0 VDC | 0 VDC |
| 1779689278 | 270 Count | 129 Count | 129 Count | 0 VDC | 0 VDC |
| 1779687477 | 268 Count | 128 Count | 128 Count | 0 VDC | 0 VDC |
| 1779685676 | 266 Count | 127 Count | 127 Count | 0 VDC | 0 VDC |
| 1779683883 | 264 Count | 126 Count | 126 Count | 0 VDC | 0 VDC |
| 1779682082 | 262 Count | 125 Count | 125 Count | 0 VDC | 0 VDC |
| 1779680282 | 260 Count | 124 Count | 124 Count | 0 VDC | 0 VDC |
| 1779678481 | 258 Count | 123 Count | 123 Count | 0 VDC | 0 VDC |
| 1779676680 | 256 Count | 122 Count | 122 Count | 0 VDC | 0 VDC |
| 1779674879 | 254 Count | 121 Count | 121 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)