This is the latest recevied telemetry packets stored in our database for station/object VK3AFQ-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762406399 | 680 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762404595 | 679 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762402791 | 678 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762400987 | 677 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762399182 | 676 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762397377 | 675 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762395573 | 674 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762381193 | 666 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762377584 | 664 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762373972 | 662 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762372168 | 661 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762357783 | 653 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762355979 | 652 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762354176 | 651 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762352370 | 650 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762350566 | 649 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762348761 | 648 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762346957 | 647 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762343407 | 645 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762341602 | 644 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762337991 | 642 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762336187 | 641 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762334381 | 640 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762332577 | 639 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1762330773 | 638 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)