This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762343573 | 257 Count | 383 Count | 221 Count | 4.1 VDC | 5.54 VDC |
| 1762341775 | 250 Count | 369 Count | 215 Count | 4.11 VDC | 5.54 VDC |
| 1762339977 | 243 Count | 359 Count | 209 Count | 4.11 VDC | 5.54 VDC |
| 1762338178 | 236 Count | 348 Count | 203 Count | 4.11 VDC | 5.54 VDC |
| 1762336372 | 224 Count | 336 Count | 197 Count | 4.12 VDC | 5.52 VDC |
| 1762334576 | 217 Count | 327 Count | 191 Count | 4.17 VDC | 5.5 VDC |
| 1762332779 | 211 Count | 321 Count | 186 Count | 4.15 VDC | 4.6 VDC |
| 1762330982 | 205 Count | 315 Count | 181 Count | 4.11 VDC | 4.52 VDC |
| 1762325588 | 183 Count | 277 Count | 162 Count | 4.06 VDC | 4.36 VDC |
| 1762323790 | 176 Count | 266 Count | 156 Count | 4.05 VDC | 4.4 VDC |
| 1762321994 | 168 Count | 255 Count | 149 Count | 4.04 VDC | 4.42 VDC |
| 1762305815 | 103 Count | 155 Count | 93 Count | 4.06 VDC | 0 VDC |
| 1762304017 | 96 Count | 142 Count | 87 Count | 4.06 VDC | 0 VDC |
| 1762300422 | 82 Count | 118 Count | 75 Count | 4.06 VDC | 0 VDC |
| 1762298625 | 73 Count | 103 Count | 67 Count | 4.06 VDC | 0 VDC |
| 1762296828 | 62 Count | 88 Count | 57 Count | 4.06 VDC | 0 VDC |
| 1762295030 | 52 Count | 73 Count | 48 Count | 4.06 VDC | 0 VDC |
| 1762280655 | 569 Count | 966 Count | 504 Count | 4.08 VDC | 0 VDC |
| 1762278857 | 557 Count | 950 Count | 493 Count | 4.08 VDC | 0 VDC |
| 1762277060 | 546 Count | 935 Count | 483 Count | 4.08 VDC | 0 VDC |
| 1762275262 | 536 Count | 921 Count | 474 Count | 4.08 VDC | 0 VDC |
| 1762273466 | 524 Count | 906 Count | 463 Count | 4.09 VDC | 0 VDC |
| 1762271668 | 514 Count | 892 Count | 454 Count | 4.09 VDC | 0 VDC |
| 1762269870 | 502 Count | 865 Count | 443 Count | 4.1 VDC | 0.3 VDC |
| 1762266274 | 482 Count | 792 Count | 425 Count | 4.1 VDC | 5.52 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)