This is the latest recevied telemetry packets stored in our database for station/object SR2DTW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783772137 | 659 Count | 798 Count | 41 Count | 0 VDC | 0 VDC |
| 1783770456 | 658 Count | 794 Count | 41 Count | 0 VDC | 0 VDC |
| 1783768775 | 655 Count | 789 Count | 39 Count | 0 VDC | 0 VDC |
| 1783765414 | 653 Count | 786 Count | 39 Count | 0 VDC | 0 VDC |
| 1783763733 | 652 Count | 786 Count | 39 Count | 0 VDC | 0 VDC |
| 1783762052 | 651 Count | 784 Count | 39 Count | 0 VDC | 0 VDC |
| 1783758690 | 649 Count | 781 Count | 39 Count | 0 VDC | 0 VDC |
| 1783757010 | 648 Count | 780 Count | 39 Count | 0 VDC | 0 VDC |
| 1783755578 | 643 Count | 779 Count | 39 Count | 0 VDC | 0 VDC |
| 1783753897 | 642 Count | 778 Count | 39 Count | 0 VDC | 0 VDC |
| 1783752216 | 641 Count | 769 Count | 39 Count | 0 VDC | 0 VDC |
| 1783750536 | 640 Count | 768 Count | 39 Count | 0 VDC | 0 VDC |
| 1783747174 | 638 Count | 767 Count | 39 Count | 0 VDC | 0 VDC |
| 1783743813 | 636 Count | 761 Count | 39 Count | 0 VDC | 0 VDC |
| 1783742132 | 635 Count | 759 Count | 39 Count | 0 VDC | 0 VDC |
| 1783740451 | 634 Count | 757 Count | 39 Count | 0 VDC | 0 VDC |
| 1783738770 | 633 Count | 754 Count | 39 Count | 0 VDC | 0 VDC |
| 1783737089 | 632 Count | 749 Count | 39 Count | 0 VDC | 0 VDC |
| 1783735409 | 631 Count | 746 Count | 39 Count | 0 VDC | 0 VDC |
| 1783733977 | 626 Count | 746 Count | 39 Count | 0 VDC | 0 VDC |
| 1783732296 | 625 Count | 744 Count | 39 Count | 0 VDC | 0 VDC |
| 1783730615 | 624 Count | 736 Count | 39 Count | 0 VDC | 0 VDC |
| 1783727254 | 622 Count | 731 Count | 39 Count | 0 VDC | 0 VDC |
| 1783707334 | 606 Count | 712 Count | 39 Count | 0 VDC | 0 VDC |
| 1783703972 | 604 Count | 706 Count | 39 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)