This is the latest recevied telemetry packets stored in our database for station/object EA8EE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754461513 | 915 Count | 686 Count | 686 Count | 0 VDC | 0 VDC |
| 1754459710 | 911 Count | 683 Count | 683 Count | 0 VDC | 0 VDC |
| 1754457906 | 907 Count | 680 Count | 680 Count | 0 VDC | 0 VDC |
| 1754456103 | 903 Count | 677 Count | 677 Count | 0 VDC | 0 VDC |
| 1754454337 | 899 Count | 674 Count | 674 Count | 0 VDC | 0 VDC |
| 1754452534 | 895 Count | 671 Count | 671 Count | 0 VDC | 0 VDC |
| 1754450731 | 891 Count | 668 Count | 668 Count | 0 VDC | 0 VDC |
| 1754439912 | 867 Count | 650 Count | 650 Count | 0 VDC | 0 VDC |
| 1754432736 | 851 Count | 638 Count | 638 Count | 0 VDC | 0 VDC |
| 1754429130 | 843 Count | 632 Count | 632 Count | 0 VDC | 0 VDC |
| 1754427327 | 839 Count | 629 Count | 629 Count | 0 VDC | 0 VDC |
| 1754425524 | 836 Count | 627 Count | 627 Count | 0 VDC | 0 VDC |
| 1754423721 | 832 Count | 624 Count | 624 Count | 0 VDC | 0 VDC |
| 1754421917 | 828 Count | 621 Count | 621 Count | 0 VDC | 0 VDC |
| 1754420114 | 824 Count | 618 Count | 618 Count | 0 VDC | 0 VDC |
| 1754416508 | 816 Count | 612 Count | 612 Count | 0 VDC | 0 VDC |
| 1754414705 | 812 Count | 609 Count | 609 Count | 0 VDC | 0 VDC |
| 1754412902 | 808 Count | 606 Count | 606 Count | 0 VDC | 0 VDC |
| 1754411136 | 804 Count | 603 Count | 603 Count | 0 VDC | 0 VDC |
| 1754409333 | 800 Count | 600 Count | 600 Count | 0 VDC | 0 VDC |
| 1754407530 | 796 Count | 597 Count | 597 Count | 0 VDC | 0 VDC |
| 1754403924 | 788 Count | 591 Count | 591 Count | 0 VDC | 0 VDC |
| 1754402121 | 784 Count | 588 Count | 588 Count | 0 VDC | 0 VDC |
| 1754400318 | 780 Count | 585 Count | 585 Count | 0 VDC | 0 VDC |
| 1754398515 | 776 Count | 582 Count | 582 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)