This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783797408 | 16 Count | 177 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1783793807 | 4 Count | 65 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1783790205 | 40 Count | 967 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1783773999 | 37 Count | 1019 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1783772198 | 33 Count | 906 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1783770397 | 29 Count | 758 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1783768597 | 25 Count | 622 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1783764995 | 15 Count | 390 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1783761394 | 7 Count | 162 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1783757793 | 116 Count | 1070 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1783754207 | 100 Count | 934 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1783752406 | 92 Count | 889 Count | 0 Count | 4 VDC | 0 VDC |
| 1783750605 | 84 Count | 823 Count | 0 Count | 4.01 VDC | 0 VDC |
| 1783748805 | 76 Count | 764 Count | 0 Count | 4 VDC | 0 VDC |
| 1783747003 | 70 Count | 703 Count | 0 Count | 4 VDC | 0 VDC |
| 1783745203 | 66 Count | 641 Count | 0 Count | 4 VDC | 0 VDC |
| 1783743402 | 62 Count | 591 Count | 0 Count | 4 VDC | 0 VDC |
| 1783741601 | 58 Count | 546 Count | 0 Count | 4 VDC | 0 VDC |
| 1783739800 | 54 Count | 506 Count | 0 Count | 4 VDC | 0 VDC |
| 1783738000 | 50 Count | 461 Count | 0 Count | 4 VDC | 0 VDC |
| 1783736199 | 45 Count | 388 Count | 0 Count | 4 VDC | 0 VDC |
| 1783734398 | 41 Count | 340 Count | 0 Count | 4 VDC | 0 VDC |
| 1783732598 | 37 Count | 295 Count | 0 Count | 4 VDC | 0 VDC |
| 1783730797 | 33 Count | 257 Count | 0 Count | 4 VDC | 0 VDC |
| 1783728997 | 28 Count | 210 Count | 0 Count | 4 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)