This is the latest recevied telemetry packets stored in our database for station/object SP8SD-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791592586 | 107 Count | 343 Count | 65 Count | 4.25 VDC | 0.14 VDC |
| 1791592285 | 106 Count | 336 Count | 65 Count | 4.25 VDC | 0.14 VDC |
| 1791591985 | 103 Count | 331 Count | 63 Count | 4.19 VDC | 0.16 VDC |
| 1791577599 | 288 Count | 935 Count | 175 Count | 4.22 VDC | 0.16 VDC |
| 1791577299 | 287 Count | 928 Count | 175 Count | 4.27 VDC | 0.14 VDC |
| 1791575796 | 278 Count | 894 Count | 171 Count | 4.26 VDC | 0.14 VDC |
| 1791574594 | 266 Count | 858 Count | 163 Count | 4.25 VDC | 0.16 VDC |
| 1791574293 | 265 Count | 851 Count | 163 Count | 4.2 VDC | 0.14 VDC |
| 1791573692 | 261 Count | 839 Count | 161 Count | 4.28 VDC | 0.14 VDC |
| 1791572189 | 251 Count | 802 Count | 156 Count | 4.2 VDC | 0.16 VDC |
| 1791571286 | 242 Count | 765 Count | 150 Count | 4.22 VDC | 0.14 VDC |
| 1791570985 | 240 Count | 757 Count | 149 Count | 4.23 VDC | 0.14 VDC |
| 1791569182 | 230 Count | 712 Count | 145 Count | 4.19 VDC | 0.14 VDC |
| 1791568622 | 221 Count | 702 Count | 142 Count | 4.19 VDC | 0.14 VDC |
| 1791567419 | 212 Count | 677 Count | 139 Count | 4.21 VDC | 0.14 VDC |
| 1791567118 | 210 Count | 671 Count | 138 Count | 4.28 VDC | 0.14 VDC |
| 1791566516 | 205 Count | 658 Count | 135 Count | 4.2 VDC | 0.14 VDC |
| 1791566216 | 202 Count | 645 Count | 133 Count | 4.25 VDC | 0.14 VDC |
| 1791565013 | 188 Count | 609 Count | 123 Count | 4.24 VDC | 0.14 VDC |
| 1791564713 | 187 Count | 600 Count | 123 Count | 4.26 VDC | 0.14 VDC |
| 1791564412 | 184 Count | 591 Count | 121 Count | 4.2 VDC | 0.14 VDC |
| 1791563811 | 178 Count | 578 Count | 117 Count | 4.2 VDC | 0.14 VDC |
| 1791563510 | 173 Count | 568 Count | 113 Count | 4.27 VDC | 0.14 VDC |
| 1791563210 | 171 Count | 561 Count | 112 Count | 4.26 VDC | 0.14 VDC |
| 1791562909 | 167 Count | 552 Count | 109 Count | 4.27 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)