This is the latest recevied telemetry packets stored in our database for station/object KY1N-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766518059 | 497 Volts | 566 Deg.F | 0 | 0 | 0 |
| 1766517807 | 499 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1766388839 | 469 Volts | 566 Deg.F | 0 | 0 | 0 |
| 1766386147 | 464 Volts | 568 Deg.F | 0 | 0 | 0 |
| 1766381663 | 463 Volts | 573 Deg.F | 0 | 0 | 0 |
| 1766378077 | 497 Volts | 574 Deg.F | 0 | 0 | 0 |
| 1766377698 | 483 Volts | 572 Deg.F | 0 | 0 | 0 |
| 1766377456 | 490 Volts | 570 Deg.F | 0 | 0 | 0 |
| 1766377299 | 481 Volts | 569 Deg.F | 0 | 0 | 0 |
| 1766377273 | 497 Volts | 568 Deg.F | 0 | 0 | 0 |
| 1766377189 | 500 Volts | 568 Deg.F | 0 | 0 | 0 |
| 1766377182 | 500 Volts | 568 Deg.F | 0 | 0 | 0 |
| 1766377163 | 494 Volts | 567 Deg.F | 0 | 0 | 0 |
| 1766377155 | 497 Volts | 567 Deg.F | 0 | 0 | 0 |
| 1766377119 | 499 Volts | 567 Deg.F | 0 | 0 | 0 |
| 1766377042 | 498 Volts | 566 Deg.F | 0 | 0 | 0 |
| 1766376926 | 499 Volts | 566 Deg.F | 0 | 0 | 0 |
| 1766376880 | 483 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1766376876 | 499 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1766376834 | 498 Volts | 565 Deg.F | 0 | 0 | 0 |
| 1766376819 | 498 Volts | 564 Deg.F | 0 | 0 | 0 |
| 1766376812 | 484 Volts | 564 Deg.F | 0 | 0 | 0 |
| 1766353477 | 484 Volts | 579 Deg.F | 0 | 0 | 0 |
| 1766353342 | 487 Volts | 579 Deg.F | 0 | 0 | 0 |
| 1766352948 | 496 Volts | 577 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)