This is the latest recevied telemetry packets stored in our database for station/object SP8SOB-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791592561 | 607 Count | 642 Count | 362 Count | 0 VDC | 0 VDC |
| 1791578151 | 547 Count | 563 Count | 318 Count | 0 VDC | 0 VDC |
| 1791573648 | 525 Count | 535 Count | 301 Count | 0 VDC | 0 VDC |
| 1791567344 | 497 Count | 502 Count | 280 Count | 0 VDC | 0 VDC |
| 1791549371 | 444 Count | 460 Count | 255 Count | 0 VDC | 0 VDC |
| 1791545745 | 427 Count | 452 Count | 251 Count | 0 VDC | 0 VDC |
| 1791533156 | 392 Count | 420 Count | 234 Count | 0 VDC | 0 VDC |
| 1791530454 | 380 Count | 408 Count | 225 Count | 0 VDC | 0 VDC |
| 1791527752 | 373 Count | 402 Count | 221 Count | 0 VDC | 0 VDC |
| 1791525038 | 363 Count | 398 Count | 218 Count | 0 VDC | 0 VDC |
| 1791523236 | 359 Count | 395 Count | 216 Count | 0 VDC | 0 VDC |
| 1791522336 | 357 Count | 394 Count | 215 Count | 0 VDC | 0 VDC |
| 1791520534 | 354 Count | 392 Count | 214 Count | 0 VDC | 0 VDC |
| 1791519634 | 351 Count | 389 Count | 212 Count | 0 VDC | 0 VDC |
| 1791518733 | 349 Count | 387 Count | 211 Count | 0 VDC | 0 VDC |
| 1791516031 | 343 Count | 381 Count | 208 Count | 0 VDC | 0 VDC |
| 1791515134 | 338 Count | 379 Count | 208 Count | 0 VDC | 0 VDC |
| 1791514254 | 333 Count | 377 Count | 208 Count | 0 VDC | 0 VDC |
| 1791513354 | 330 Count | 374 Count | 206 Count | 0 VDC | 0 VDC |
| 1791512453 | 328 Count | 373 Count | 205 Count | 0 VDC | 0 VDC |
| 1791511552 | 325 Count | 370 Count | 203 Count | 0 VDC | 0 VDC |
| 1791498931 | 284 Count | 331 Count | 180 Count | 0 VDC | 0 VDC |
| 1791498030 | 280 Count | 327 Count | 177 Count | 0 VDC | 0 VDC |
| 1791496229 | 273 Count | 320 Count | 172 Count | 0 VDC | 0 VDC |
| 1791495328 | 269 Count | 316 Count | 169 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)