This is the latest recevied telemetry packets stored in our database for station/object SP2WM-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791592495 | 321 Count | 566 Count | 116 Count | 0 VDC | 0 VDC |
| 1791578082 | 304 Count | 560 Count | 115 Count | 0 VDC | 0 VDC |
| 1791573596 | 293 Count | 550 Count | 113 Count | 0 VDC | 0 VDC |
| 1791571795 | 290 Count | 546 Count | 112 Count | 0 VDC | 0 VDC |
| 1791570894 | 287 Count | 542 Count | 110 Count | 0 VDC | 0 VDC |
| 1791567291 | 275 Count | 528 Count | 102 Count | 0 VDC | 0 VDC |
| 1791564589 | 267 Count | 517 Count | 97 Count | 0 VDC | 0 VDC |
| 1791563688 | 265 Count | 515 Count | 96 Count | 0 VDC | 0 VDC |
| 1791560084 | 258 Count | 496 Count | 93 Count | 0 VDC | 0 VDC |
| 1791556482 | 252 Count | 493 Count | 91 Count | 0 VDC | 0 VDC |
| 1791552896 | 244 Count | 489 Count | 91 Count | 0 VDC | 0 VDC |
| 1791550194 | 239 Count | 480 Count | 89 Count | 0 VDC | 0 VDC |
| 1791549294 | 238 Count | 480 Count | 89 Count | 0 VDC | 0 VDC |
| 1791545690 | 234 Count | 459 Count | 89 Count | 0 VDC | 0 VDC |
| 1791542087 | 230 Count | 458 Count | 89 Count | 0 VDC | 0 VDC |
| 1791540285 | 228 Count | 456 Count | 89 Count | 0 VDC | 0 VDC |
| 1791537584 | 222 Count | 450 Count | 86 Count | 0 VDC | 0 VDC |
| 1791536682 | 220 Count | 448 Count | 85 Count | 0 VDC | 0 VDC |
| 1791534880 | 216 Count | 440 Count | 83 Count | 0 VDC | 0 VDC |
| 1791533980 | 214 Count | 437 Count | 82 Count | 0 VDC | 0 VDC |
| 1791533079 | 211 Count | 432 Count | 80 Count | 0 VDC | 0 VDC |
| 1791532178 | 209 Count | 429 Count | 79 Count | 0 VDC | 0 VDC |
| 1791531295 | 203 Count | 427 Count | 78 Count | 0 VDC | 0 VDC |
| 1791530395 | 202 Count | 426 Count | 78 Count | 0 VDC | 0 VDC |
| 1791529494 | 201 Count | 425 Count | 78 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)