This is the latest recevied telemetry packets stored in our database for station/object OK1VIG-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791592633 | 531 Count | 462 Count | 375 Count | 3.67 VDC | 0.14 VDC |
| 1791574638 | 526 Count | 462 Count | 375 Count | 3.68 VDC | 0.14 VDC |
| 1791571033 | 525 Count | 462 Count | 375 Count | 3.65 VDC | 0.14 VDC |
| 1791560251 | 518 Count | 457 Count | 371 Count | 3.69 VDC | 0.14 VDC |
| 1791545857 | 497 Count | 431 Count | 354 Count | 3.7 VDC | 0.14 VDC |
| 1791542252 | 496 Count | 431 Count | 354 Count | 3.7 VDC | 0.14 VDC |
| 1791538647 | 495 Count | 431 Count | 354 Count | 3.7 VDC | 0.14 VDC |
| 1791535042 | 494 Count | 431 Count | 354 Count | 3.71 VDC | 0.14 VDC |
| 1791531436 | 493 Count | 431 Count | 354 Count | 3.7 VDC | 0.14 VDC |
| 1791527831 | 492 Count | 431 Count | 354 Count | 3.7 VDC | 0.14 VDC |
| 1791524256 | 490 Count | 430 Count | 353 Count | 3.69 VDC | 0.14 VDC |
| 1791520651 | 469 Count | 410 Count | 333 Count | 3.69 VDC | 0.14 VDC |
| 1791517046 | 465 Count | 407 Count | 330 Count | 3.68 VDC | 0.14 VDC |
| 1791513440 | 464 Count | 407 Count | 330 Count | 3.7 VDC | 0.14 VDC |
| 1791509835 | 463 Count | 407 Count | 330 Count | 3.7 VDC | 0.14 VDC |
| 1791506230 | 462 Count | 407 Count | 330 Count | 3.7 VDC | 0.14 VDC |
| 1791499050 | 460 Count | 407 Count | 330 Count | 3.69 VDC | 0.14 VDC |
| 1791495445 | 459 Count | 407 Count | 330 Count | 3.68 VDC | 0.14 VDC |
| 1791491840 | 458 Count | 407 Count | 330 Count | 3.72 VDC | 0.14 VDC |
| 1791477449 | 441 Count | 392 Count | 317 Count | 3.7 VDC | 0.14 VDC |
| 1791470242 | 431 Count | 381 Count | 309 Count | 3.76 VDC | 0.14 VDC |
| 1791466633 | 423 Count | 374 Count | 302 Count | 3.77 VDC | 0.14 VDC |
| 1791463028 | 422 Count | 368 Count | 302 Count | 3.8 VDC | 0.14 VDC |
| 1791459454 | 421 Count | 368 Count | 302 Count | 3.81 VDC | 0.14 VDC |
| 1791455849 | 420 Count | 368 Count | 302 Count | 3.81 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)