This is the latest recevied telemetry packets stored in our database for station/object F6ZBY-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770970616 | 406 Count | 375 Count | 0 Count | 0 VDC | 0 VDC |
| 1770968815 | 405 Count | 373 Count | 0 Count | 0 VDC | 0 VDC |
| 1770967014 | 404 Count | 371 Count | 0 Count | 0 VDC | 0 VDC |
| 1770963413 | 402 Count | 369 Count | 0 Count | 0 VDC | 0 VDC |
| 1770961612 | 401 Count | 369 Count | 0 Count | 0 VDC | 0 VDC |
| 1770959811 | 400 Count | 368 Count | 0 Count | 0 VDC | 0 VDC |
| 1770958011 | 399 Count | 368 Count | 0 Count | 0 VDC | 0 VDC |
| 1770925613 | 381 Count | 339 Count | 0 Count | 0 VDC | 0 VDC |
| 1770923813 | 380 Count | 337 Count | 0 Count | 0 VDC | 0 VDC |
| 1770902211 | 368 Count | 320 Count | 0 Count | 0 VDC | 0 VDC |
| 1770895008 | 364 Count | 306 Count | 0 Count | 0 VDC | 0 VDC |
| 1770887805 | 360 Count | 292 Count | 0 Count | 0 VDC | 0 VDC |
| 1770886014 | 359 Count | 290 Count | 0 Count | 0 VDC | 0 VDC |
| 1770882412 | 357 Count | 285 Count | 0 Count | 0 VDC | 0 VDC |
| 1770880612 | 356 Count | 284 Count | 0 Count | 0 VDC | 0 VDC |
| 1770877011 | 354 Count | 281 Count | 0 Count | 0 VDC | 0 VDC |
| 1770875210 | 353 Count | 281 Count | 0 Count | 0 VDC | 0 VDC |
| 1770873409 | 352 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1770871609 | 351 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1770869808 | 350 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1770866207 | 348 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1770864413 | 347 Count | 280 Count | 0 Count | 0 VDC | 0 VDC |
| 1770842812 | 335 Count | 273 Count | 0 Count | 0 VDC | 0 VDC |
| 1770841011 | 334 Count | 272 Count | 0 Count | 0 VDC | 0 VDC |
| 1770837410 | 332 Count | 272 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)