This is the latest recevied telemetry packets stored in our database for station/object SP8KZI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766372552 | 711 Count | 831 Count | 175 Count | 0 VDC | 0.08 VDC |
| 1766372431 | 710 Count | 829 Count | 175 Count | 0 VDC | 0.08 VDC |
| 1766372309 | 708 Count | 827 Count | 174 Count | 0 VDC | 0.08 VDC |
| 1766372067 | 706 Count | 826 Count | 174 Count | 0 VDC | 0.08 VDC |
| 1766371945 | 705 Count | 825 Count | 174 Count | 0 VDC | 0.08 VDC |
| 1766371824 | 703 Count | 823 Count | 173 Count | 0 VDC | 0.08 VDC |
| 1766371703 | 702 Count | 822 Count | 173 Count | 0 VDC | 0.08 VDC |
| 1766371581 | 701 Count | 819 Count | 173 Count | 0 VDC | 0.08 VDC |
| 1766371460 | 700 Count | 818 Count | 173 Count | 0 VDC | 0.08 VDC |
| 1766371338 | 698 Count | 816 Count | 172 Count | 0 VDC | 0.08 VDC |
| 1766371217 | 697 Count | 815 Count | 172 Count | 0 VDC | 0.08 VDC |
| 1766371096 | 695 Count | 813 Count | 171 Count | 0 VDC | 0.08 VDC |
| 1766370974 | 694 Count | 812 Count | 171 Count | 0 VDC | 0.08 VDC |
| 1766370853 | 693 Count | 811 Count | 171 Count | 0 VDC | 0.08 VDC |
| 1766370732 | 691 Count | 807 Count | 170 Count | 0 VDC | 0.08 VDC |
| 1766370610 | 690 Count | 806 Count | 170 Count | 0 VDC | 0.08 VDC |
| 1766370489 | 689 Count | 805 Count | 170 Count | 0 VDC | 0.08 VDC |
| 1766370367 | 688 Count | 804 Count | 170 Count | 0 VDC | 0.08 VDC |
| 1766370246 | 686 Count | 802 Count | 169 Count | 0 VDC | 0.08 VDC |
| 1766370125 | 685 Count | 801 Count | 169 Count | 0 VDC | 0.08 VDC |
| 1766370003 | 684 Count | 800 Count | 169 Count | 0 VDC | 0.08 VDC |
| 1766369882 | 683 Count | 798 Count | 169 Count | 0 VDC | 0.08 VDC |
| 1766369760 | 681 Count | 796 Count | 168 Count | 0 VDC | 0.08 VDC |
| 1766369639 | 680 Count | 795 Count | 168 Count | 0 VDC | 0.08 VDC |
| 1766369518 | 679 Count | 794 Count | 168 Count | 0 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)