This is the latest recevied telemetry packets stored in our database for station/object SP9DLM-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766495835 | 688 Count | 516 Count | 474 Count | 0 VDC | 0 VDC |
| 1766492228 | 678 Count | 508 Count | 466 Count | 0 VDC | 0 VDC |
| 1766490425 | 677 Count | 508 Count | 466 Count | 0 VDC | 0 VDC |
| 1766488621 | 676 Count | 508 Count | 466 Count | 0 VDC | 0 VDC |
| 1766486818 | 659 Count | 492 Count | 450 Count | 0 VDC | 0 VDC |
| 1766485014 | 656 Count | 490 Count | 448 Count | 0 VDC | 0 VDC |
| 1766481397 | 652 Count | 488 Count | 446 Count | 0 VDC | 0 VDC |
| 1766477790 | 646 Count | 484 Count | 442 Count | 0 VDC | 0 VDC |
| 1766475987 | 643 Count | 482 Count | 440 Count | 0 VDC | 0 VDC |
| 1766474183 | 640 Count | 480 Count | 438 Count | 0 VDC | 0 VDC |
| 1766472380 | 637 Count | 478 Count | 436 Count | 0 VDC | 0 VDC |
| 1766470577 | 634 Count | 476 Count | 434 Count | 0 VDC | 0 VDC |
| 1766468773 | 631 Count | 474 Count | 432 Count | 0 VDC | 0 VDC |
| 1766466970 | 625 Count | 469 Count | 427 Count | 0 VDC | 0 VDC |
| 1766465207 | 615 Count | 460 Count | 418 Count | 0 VDC | 0 VDC |
| 1766463403 | 612 Count | 458 Count | 416 Count | 0 VDC | 0 VDC |
| 1766461600 | 609 Count | 456 Count | 414 Count | 0 VDC | 0 VDC |
| 1766431808 | 486 Count | 351 Count | 309 Count | 0 VDC | 0 VDC |
| 1766429991 | 463 Count | 329 Count | 287 Count | 0 VDC | 0 VDC |
| 1766428188 | 461 Count | 328 Count | 286 Count | 0 VDC | 0 VDC |
| 1766424581 | 459 Count | 328 Count | 286 Count | 0 VDC | 0 VDC |
| 1766413800 | 453 Count | 328 Count | 286 Count | 0 VDC | 0 VDC |
| 1766410193 | 451 Count | 328 Count | 286 Count | 0 VDC | 0 VDC |
| 1766408390 | 450 Count | 328 Count | 286 Count | 0 VDC | 0 VDC |
| 1766406585 | 449 Count | 328 Count | 286 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)