This is the latest recevied telemetry packets stored in our database for station/object SR2WH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763977313 | 647 Count | 766 Count | 435 Count | 0 VDC | 0 VDC |
| 1763975513 | 645 Count | 765 Count | 434 Count | 0 VDC | 0 VDC |
| 1763973711 | 642 Count | 763 Count | 432 Count | 0 VDC | 0 VDC |
| 1763971911 | 640 Count | 762 Count | 431 Count | 0 VDC | 0 VDC |
| 1763970110 | 638 Count | 761 Count | 430 Count | 0 VDC | 0 VDC |
| 1763968310 | 636 Count | 760 Count | 429 Count | 0 VDC | 0 VDC |
| 1763966509 | 634 Count | 759 Count | 428 Count | 0 VDC | 0 VDC |
| 1763964708 | 632 Count | 758 Count | 427 Count | 0 VDC | 0 VDC |
| 1763962908 | 630 Count | 757 Count | 426 Count | 0 VDC | 0 VDC |
| 1763961107 | 628 Count | 756 Count | 425 Count | 0 VDC | 0 VDC |
| 1763959306 | 623 Count | 752 Count | 421 Count | 0 VDC | 0 VDC |
| 1763957506 | 621 Count | 751 Count | 420 Count | 0 VDC | 0 VDC |
| 1763955705 | 619 Count | 750 Count | 419 Count | 0 VDC | 0 VDC |
| 1763939500 | 600 Count | 740 Count | 409 Count | 0 VDC | 0 VDC |
| 1763914269 | 560 Count | 719 Count | 388 Count | 0 VDC | 0 VDC |
| 1763910668 | 556 Count | 717 Count | 386 Count | 0 VDC | 0 VDC |
| 1763908868 | 553 Count | 715 Count | 384 Count | 0 VDC | 0 VDC |
| 1763907067 | 550 Count | 711 Count | 382 Count | 0 VDC | 0 VDC |
| 1763905267 | 548 Count | 710 Count | 381 Count | 0 VDC | 0 VDC |
| 1763901665 | 540 Count | 704 Count | 375 Count | 0 VDC | 0 VDC |
| 1763898063 | 532 Count | 698 Count | 369 Count | 0 VDC | 0 VDC |
| 1763896263 | 528 Count | 695 Count | 366 Count | 0 VDC | 0 VDC |
| 1763877240 | 476 Count | 653 Count | 325 Count | 0 VDC | 0 VDC |
| 1763875439 | 472 Count | 650 Count | 322 Count | 0 VDC | 0 VDC |
| 1763873638 | 468 Count | 646 Count | 319 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)