This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791592483 | 145 Count | 464 Count | 141 Count | 0 VDC | 0 VDC |
| 1791578077 | 149 Count | 722 Count | 143 Count | 0 VDC | 0 VDC |
| 1791574475 | 86 Count | 510 Count | 82 Count | 0 VDC | 0 VDC |
| 1791570874 | 33 Count | 171 Count | 31 Count | 0 VDC | 0 VDC |
| 1791567272 | 216 Count | 995 Count | 210 Count | 0 VDC | 0 VDC |
| 1791563671 | 152 Count | 590 Count | 148 Count | 0 VDC | 0 VDC |
| 1791561871 | 121 Count | 469 Count | 118 Count | 0 VDC | 0 VDC |
| 1791560070 | 87 Count | 329 Count | 85 Count | 0 VDC | 0 VDC |
| 1791556469 | 26 Count | 102 Count | 26 Count | 0 VDC | 0 VDC |
| 1791552867 | 267 Count | 878 Count | 256 Count | 0 VDC | 0 VDC |
| 1791551082 | 237 Count | 773 Count | 231 Count | 0 VDC | 0 VDC |
| 1791549281 | 202 Count | 646 Count | 197 Count | 0 VDC | 0 VDC |
| 1791545680 | 119 Count | 441 Count | 116 Count | 0 VDC | 0 VDC |
| 1791542082 | 60 Count | 239 Count | 59 Count | 0 VDC | 0 VDC |
| 1791540277 | 31 Count | 127 Count | 31 Count | 0 VDC | 0 VDC |
| 1791538477 | 280 Count | 1106 Count | 269 Count | 0 VDC | 0 VDC |
| 1791536676 | 251 Count | 993 Count | 241 Count | 0 VDC | 0 VDC |
| 1791534875 | 223 Count | 871 Count | 214 Count | 0 VDC | 0 VDC |
| 1791533075 | 209 Count | 743 Count | 201 Count | 0 VDC | 0 VDC |
| 1791531274 | 189 Count | 651 Count | 182 Count | 0 VDC | 0 VDC |
| 1791529473 | 174 Count | 562 Count | 168 Count | 0 VDC | 0 VDC |
| 1791527672 | 157 Count | 495 Count | 152 Count | 0 VDC | 0 VDC |
| 1791525872 | 138 Count | 425 Count | 134 Count | 0 VDC | 0 VDC |
| 1791524071 | 117 Count | 330 Count | 114 Count | 0 VDC | 0 VDC |
| 1791522271 | 86 Count | 247 Count | 84 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)