This is the latest recevied telemetry packets stored in our database for station/object F5ZYM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791592397 | 191 Count | 552 Count | 122 Count | 0 VDC | 0 VDC |
| 1791591493 | 189 Count | 547 Count | 121 Count | 0 VDC | 0 VDC |
| 1791578836 | 167 Count | 476 Count | 113 Count | 0 VDC | 0 VDC |
| 1791577932 | 165 Count | 470 Count | 112 Count | 0 VDC | 0 VDC |
| 1791577028 | 163 Count | 466 Count | 111 Count | 0 VDC | 0 VDC |
| 1791575321 | 161 Count | 459 Count | 111 Count | 0 VDC | 0 VDC |
| 1791574417 | 159 Count | 453 Count | 110 Count | 0 VDC | 0 VDC |
| 1791573513 | 158 Count | 450 Count | 110 Count | 0 VDC | 0 VDC |
| 1791572609 | 149 Count | 436 Count | 102 Count | 0 VDC | 0 VDC |
| 1791571705 | 148 Count | 432 Count | 102 Count | 0 VDC | 0 VDC |
| 1791570800 | 147 Count | 427 Count | 102 Count | 0 VDC | 0 VDC |
| 1791569896 | 137 Count | 405 Count | 93 Count | 0 VDC | 0 VDC |
| 1791568993 | 135 Count | 400 Count | 92 Count | 0 VDC | 0 VDC |
| 1791567184 | 132 Count | 390 Count | 91 Count | 0 VDC | 0 VDC |
| 1791566280 | 130 Count | 385 Count | 90 Count | 0 VDC | 0 VDC |
| 1791563568 | 122 Count | 363 Count | 85 Count | 0 VDC | 0 VDC |
| 1791560851 | 118 Count | 346 Count | 84 Count | 0 VDC | 0 VDC |
| 1791558139 | 105 Count | 321 Count | 74 Count | 0 VDC | 0 VDC |
| 1791555427 | 102 Count | 308 Count | 74 Count | 0 VDC | 0 VDC |
| 1791552811 | 72 Count | 234 Count | 47 Count | 0 VDC | 0 VDC |
| 1791551907 | 70 Count | 228 Count | 46 Count | 0 VDC | 0 VDC |
| 1791549195 | 65 Count | 213 Count | 44 Count | 0 VDC | 0 VDC |
| 1791548291 | 64 Count | 209 Count | 44 Count | 0 VDC | 0 VDC |
| 1791547387 | 60 Count | 203 Count | 41 Count | 0 VDC | 0 VDC |
| 1791546483 | 59 Count | 199 Count | 41 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)