This is the latest recevied telemetry packets stored in our database for station/object SP2KFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791591817 | 128 Count | 581 Count | 115 Count | 4.09 VDC | 0 VDC |
| 1791579220 | 38 Count | 176 Count | 36 Count | 4.08 VDC | 0 VDC |
| 1791577419 | 25 Count | 117 Count | 24 Count | 4.08 VDC | 0 VDC |
| 1791573818 | 243 Count | 1001 Count | 224 Count | 4.08 VDC | 0 VDC |
| 1791572017 | 231 Count | 946 Count | 213 Count | 4.12 VDC | 0 VDC |
| 1791570216 | 217 Count | 887 Count | 200 Count | 4.08 VDC | 0 VDC |
| 1791568415 | 205 Count | 833 Count | 189 Count | 4.11 VDC | 0 VDC |
| 1791566615 | 186 Count | 754 Count | 171 Count | 4.07 VDC | 0 VDC |
| 1791564814 | 178 Count | 711 Count | 164 Count | 4.07 VDC | 0 VDC |
| 1791563022 | 163 Count | 655 Count | 154 Count | 4.11 VDC | 0 VDC |
| 1791561221 | 149 Count | 589 Count | 141 Count | 4.07 VDC | 0 VDC |
| 1791559420 | 138 Count | 540 Count | 131 Count | 4.1 VDC | 0 VDC |
| 1791555819 | 98 Count | 399 Count | 93 Count | 4.12 VDC | 0 VDC |
| 1791554018 | 87 Count | 341 Count | 83 Count | 4.07 VDC | 0 VDC |
| 1791552217 | 54 Count | 227 Count | 51 Count | 4.09 VDC | 0 VDC |
| 1791548616 | 32 Count | 111 Count | 31 Count | 4.1 VDC | 0 VDC |
| 1791546815 | 20 Count | 55 Count | 20 Count | 4.12 VDC | 0 VDC |
| 1791545014 | 314 Count | 1030 Count | 301 Count | 4.08 VDC | 0 VDC |
| 1791543214 | 292 Count | 963 Count | 280 Count | 4.1 VDC | 0 VDC |
| 1791541421 | 273 Count | 907 Count | 266 Count | 4.11 VDC | 0 VDC |
| 1791539620 | 221 Count | 742 Count | 215 Count | 4.07 VDC | 0 VDC |
| 1791537820 | 176 Count | 588 Count | 171 Count | 4.11 VDC | 0 VDC |
| 1791536019 | 132 Count | 458 Count | 128 Count | 4.08 VDC | 0 VDC |
| 1791534218 | 108 Count | 393 Count | 105 Count | 4.09 VDC | 0 VDC |
| 1791532418 | 90 Count | 333 Count | 88 Count | 4.09 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)