This is the latest recevied telemetry packets stored in our database for station/object SK3VJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791591685 | 220 Count | 997 Count | 194 Count | 0 VDC | 0 VDC |
| 1791568279 | 65 Count | 317 Count | 56 Count | 0 VDC | 0 VDC |
| 1791541301 | 130 Count | 577 Count | 116 Count | 0 VDC | 0 VDC |
| 1791539498 | 118 Count | 529 Count | 105 Count | 0 VDC | 0 VDC |
| 1791537695 | 103 Count | 476 Count | 91 Count | 0 VDC | 0 VDC |
| 1791535892 | 93 Count | 411 Count | 82 Count | 0 VDC | 0 VDC |
| 1791534089 | 80 Count | 368 Count | 70 Count | 0 VDC | 0 VDC |
| 1791530482 | 58 Count | 272 Count | 50 Count | 0 VDC | 0 VDC |
| 1791528680 | 49 Count | 226 Count | 42 Count | 0 VDC | 0 VDC |
| 1791526876 | 38 Count | 171 Count | 32 Count | 0 VDC | 0 VDC |
| 1791525073 | 25 Count | 95 Count | 20 Count | 0 VDC | 0 VDC |
| 1791523270 | 14 Count | 48 Count | 10 Count | 0 VDC | 0 VDC |
| 1791521501 | 280 Count | 1033 Count | 249 Count | 0 VDC | 0 VDC |
| 1791519698 | 270 Count | 985 Count | 240 Count | 0 VDC | 0 VDC |
| 1791517895 | 256 Count | 929 Count | 227 Count | 0 VDC | 0 VDC |
| 1791516092 | 245 Count | 883 Count | 217 Count | 0 VDC | 0 VDC |
| 1791514289 | 234 Count | 839 Count | 207 Count | 0 VDC | 0 VDC |
| 1791512486 | 222 Count | 791 Count | 196 Count | 0 VDC | 0 VDC |
| 1791510683 | 211 Count | 748 Count | 186 Count | 0 VDC | 0 VDC |
| 1791507077 | 188 Count | 665 Count | 165 Count | 0 VDC | 0 VDC |
| 1791505274 | 176 Count | 619 Count | 154 Count | 0 VDC | 0 VDC |
| 1791503471 | 163 Count | 579 Count | 142 Count | 0 VDC | 0 VDC |
| 1791501668 | 152 Count | 534 Count | 132 Count | 0 VDC | 0 VDC |
| 1791498095 | 124 Count | 449 Count | 110 Count | 0 VDC | 0 VDC |
| 1791492686 | 87 Count | 307 Count | 76 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)