This is the latest recevied telemetry packets stored in our database for station/object SP5RT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762280296 | 320 Count | 606 Count | 234 Count | 0 VDC | 0 VDC |
| 1762279695 | 315 Count | 589 Count | 230 Count | 0 VDC | 0 VDC |
| 1762279095 | 312 Count | 574 Count | 228 Count | 0 VDC | 0 VDC |
| 1762278495 | 307 Count | 560 Count | 224 Count | 0 VDC | 0 VDC |
| 1762277894 | 304 Count | 543 Count | 222 Count | 0 VDC | 0 VDC |
| 1762277293 | 296 Count | 519 Count | 219 Count | 0 VDC | 0 VDC |
| 1762276693 | 289 Count | 502 Count | 214 Count | 0 VDC | 0 VDC |
| 1762276092 | 281 Count | 479 Count | 207 Count | 0 VDC | 0 VDC |
| 1762275491 | 278 Count | 463 Count | 205 Count | 0 VDC | 0 VDC |
| 1762274990 | 269 Count | 452 Count | 201 Count | 0 VDC | 0 VDC |
| 1762273188 | 253 Count | 406 Count | 191 Count | 0 VDC | 0 VDC |
| 1762272587 | 249 Count | 392 Count | 188 Count | 0 VDC | 0 VDC |
| 1762271987 | 229 Count | 337 Count | 169 Count | 0 VDC | 0 VDC |
| 1762269585 | 117 Count | 128 Count | 62 Count | 0 VDC | 0 VDC |
| 1762269443 | 97 Count | 110 Count | 47 Count | 0 VDC | 0 VDC |
| 1762269300 | 84 Count | 92 Count | 41 Count | 0 VDC | 0 VDC |
| 1762268954 | 80 Count | 76 Count | 40 Count | 0 VDC | 0 VDC |
| 1762268252 | 75 Count | 70 Count | 37 Count | 0 VDC | 0 VDC |
| 1762267225 | 63 Count | 50 Count | 27 Count | 0 VDC | 0 VDC |
| 1762266624 | 57 Count | 41 Count | 22 Count | 0 VDC | 0 VDC |
| 1762265423 | 45 Count | 28 Count | 12 Count | 0 VDC | 0 VDC |
| 1762264822 | 42 Count | 24 Count | 10 Count | 0 VDC | 0 VDC |
| 1762264635 | 41 Count | 23 Count | 10 Count | 0 VDC | 0 VDC |
| 1762264136 | 40 Count | 23 Count | 10 Count | 0 VDC | 0 VDC |
| 1762264109 | 39 Count | 23 Count | 10 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)