This is the latest recevied telemetry packets stored in our database for station/object SQ1BHQ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762196799 | 264 Count | 180 Count | 164 Count | 4.27 VDC | 0.14 VDC |
| 1762194996 | 259 Count | 173 Count | 160 Count | 4.3 VDC | 0.14 VDC |
| 1762193193 | 249 Count | 161 Count | 151 Count | 4.26 VDC | 0.14 VDC |
| 1762191391 | 246 Count | 159 Count | 149 Count | 4.3 VDC | 0.14 VDC |
| 1762189588 | 243 Count | 157 Count | 147 Count | 4.25 VDC | 0.14 VDC |
| 1762185982 | 235 Count | 151 Count | 141 Count | 4.3 VDC | 0.14 VDC |
| 1762184213 | 231 Count | 148 Count | 138 Count | 4.27 VDC | 0.14 VDC |
| 1762182410 | 228 Count | 146 Count | 136 Count | 4.28 VDC | 0.14 VDC |
| 1762178804 | 222 Count | 142 Count | 132 Count | 4.27 VDC | 0.14 VDC |
| 1762177001 | 219 Count | 140 Count | 130 Count | 4.25 VDC | 0.14 VDC |
| 1762175199 | 213 Count | 135 Count | 125 Count | 4.26 VDC | 0.14 VDC |
| 1762173396 | 204 Count | 127 Count | 117 Count | 4.3 VDC | 0.14 VDC |
| 1762171593 | 196 Count | 120 Count | 110 Count | 4.24 VDC | 0.14 VDC |
| 1762169790 | 193 Count | 118 Count | 108 Count | 4.23 VDC | 0.14 VDC |
| 1762167987 | 190 Count | 116 Count | 106 Count | 4.26 VDC | 0.14 VDC |
| 1762166184 | 187 Count | 114 Count | 104 Count | 4.28 VDC | 0.14 VDC |
| 1762162613 | 181 Count | 110 Count | 100 Count | 4.28 VDC | 0.14 VDC |
| 1762160810 | 180 Count | 110 Count | 100 Count | 4.3 VDC | 0.14 VDC |
| 1762157204 | 178 Count | 110 Count | 100 Count | 4.28 VDC | 0.14 VDC |
| 1762155401 | 177 Count | 110 Count | 100 Count | 4.28 VDC | 0.14 VDC |
| 1762153598 | 176 Count | 110 Count | 100 Count | 4.3 VDC | 0.14 VDC |
| 1762151795 | 173 Count | 108 Count | 98 Count | 4.23 VDC | 0.14 VDC |
| 1762149992 | 157 Count | 93 Count | 83 Count | 4.25 VDC | 0.14 VDC |
| 1762148190 | 154 Count | 91 Count | 81 Count | 4.32 VDC | 0.14 VDC |
| 1762146387 | 151 Count | 89 Count | 79 Count | 4.26 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)