This is the latest recevied telemetry packets stored in our database for station/object SQ3KT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762277880 | 8 Count | 13 Count | 4 Count | 0 VDC | 0 VDC |
| 1762276076 | 731 Count | 1029 Count | 517 Count | 0 VDC | 0 VDC |
| 1762272473 | 722 Count | 942 Count | 510 Count | 0 VDC | 0 VDC |
| 1762270673 | 717 Count | 935 Count | 506 Count | 0 VDC | 0 VDC |
| 1762268872 | 712 Count | 928 Count | 502 Count | 0 VDC | 0 VDC |
| 1762265271 | 702 Count | 915 Count | 494 Count | 0 VDC | 0 VDC |
| 1762263470 | 697 Count | 908 Count | 490 Count | 0 VDC | 0 VDC |
| 1762259869 | 687 Count | 886 Count | 482 Count | 0 VDC | 0 VDC |
| 1762258068 | 682 Count | 876 Count | 478 Count | 0 VDC | 0 VDC |
| 1762256267 | 677 Count | 863 Count | 474 Count | 0 VDC | 0 VDC |
| 1762252673 | 663 Count | 846 Count | 466 Count | 0 VDC | 0 VDC |
| 1762249072 | 654 Count | 837 Count | 459 Count | 0 VDC | 0 VDC |
| 1762247271 | 649 Count | 832 Count | 455 Count | 0 VDC | 0 VDC |
| 1762245470 | 644 Count | 827 Count | 451 Count | 0 VDC | 0 VDC |
| 1762243670 | 639 Count | 822 Count | 447 Count | 0 VDC | 0 VDC |
| 1762241869 | 634 Count | 816 Count | 443 Count | 0 VDC | 0 VDC |
| 1762240068 | 630 Count | 812 Count | 440 Count | 0 VDC | 0 VDC |
| 1762238268 | 625 Count | 806 Count | 436 Count | 0 VDC | 0 VDC |
| 1762236467 | 620 Count | 800 Count | 432 Count | 0 VDC | 0 VDC |
| 1762234666 | 615 Count | 795 Count | 428 Count | 0 VDC | 0 VDC |
| 1762232872 | 606 Count | 788 Count | 424 Count | 0 VDC | 0 VDC |
| 1762231072 | 601 Count | 783 Count | 420 Count | 0 VDC | 0 VDC |
| 1762229271 | 596 Count | 778 Count | 416 Count | 0 VDC | 0 VDC |
| 1762227470 | 591 Count | 773 Count | 412 Count | 0 VDC | 0 VDC |
| 1762225670 | 586 Count | 768 Count | 408 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)