This is the latest recevied telemetry packets stored in our database for station/object SR8ULZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1770970178 | 952 Count | 701 Count | 473 Count | 0 VDC | 0 VDC |
| 1770968377 | 950 Count | 700 Count | 472 Count | 0 VDC | 0 VDC |
| 1770966577 | 948 Count | 699 Count | 471 Count | 0 VDC | 0 VDC |
| 1770964783 | 942 Count | 698 Count | 470 Count | 0 VDC | 0 VDC |
| 1770962983 | 940 Count | 697 Count | 469 Count | 0 VDC | 0 VDC |
| 1770961182 | 938 Count | 696 Count | 468 Count | 0 VDC | 0 VDC |
| 1770959381 | 936 Count | 695 Count | 467 Count | 0 VDC | 0 VDC |
| 1770957580 | 934 Count | 694 Count | 466 Count | 0 VDC | 0 VDC |
| 1770955780 | 932 Count | 693 Count | 465 Count | 0 VDC | 0 VDC |
| 1770953979 | 930 Count | 692 Count | 464 Count | 0 VDC | 0 VDC |
| 1770930578 | 901 Count | 680 Count | 452 Count | 0 VDC | 0 VDC |
| 1770928777 | 899 Count | 679 Count | 451 Count | 0 VDC | 0 VDC |
| 1770925176 | 895 Count | 677 Count | 449 Count | 0 VDC | 0 VDC |
| 1770896379 | 855 Count | 661 Count | 433 Count | 0 VDC | 0 VDC |
| 1770892778 | 851 Count | 659 Count | 431 Count | 0 VDC | 0 VDC |
| 1770890978 | 849 Count | 658 Count | 430 Count | 0 VDC | 0 VDC |
| 1770889177 | 847 Count | 657 Count | 429 Count | 0 VDC | 0 VDC |
| 1770887376 | 845 Count | 656 Count | 428 Count | 0 VDC | 0 VDC |
| 1770885575 | 843 Count | 655 Count | 427 Count | 0 VDC | 0 VDC |
| 1770881974 | 839 Count | 653 Count | 425 Count | 0 VDC | 0 VDC |
| 1770880174 | 837 Count | 652 Count | 424 Count | 0 VDC | 0 VDC |
| 1770878380 | 831 Count | 651 Count | 423 Count | 0 VDC | 0 VDC |
| 1770876579 | 829 Count | 650 Count | 422 Count | 0 VDC | 0 VDC |
| 1770874779 | 827 Count | 649 Count | 421 Count | 0 VDC | 0 VDC |
| 1770872978 | 825 Count | 648 Count | 420 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)