This is the latest recevied telemetry packets stored in our database for station/object YO8PIC-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766517083 | 134 Count | 144 Count | 114 Count | 0 VDC | 0 VDC |
| 1766514670 | 107 Count | 114 Count | 91 Count | 0 VDC | 0 VDC |
| 1766514067 | 101 Count | 107 Count | 86 Count | 0 VDC | 0 VDC |
| 1766496084 | 866 Count | 912 Count | 723 Count | 0 VDC | 0 VDC |
| 1766493069 | 836 Count | 881 Count | 698 Count | 0 VDC | 0 VDC |
| 1766492466 | 831 Count | 876 Count | 694 Count | 0 VDC | 0 VDC |
| 1766491863 | 825 Count | 870 Count | 689 Count | 0 VDC | 0 VDC |
| 1766491260 | 819 Count | 864 Count | 684 Count | 0 VDC | 0 VDC |
| 1766490657 | 813 Count | 858 Count | 679 Count | 0 VDC | 0 VDC |
| 1766489450 | 801 Count | 846 Count | 669 Count | 0 VDC | 0 VDC |
| 1766488847 | 796 Count | 841 Count | 665 Count | 0 VDC | 0 VDC |
| 1766486435 | 771 Count | 815 Count | 644 Count | 0 VDC | 0 VDC |
| 1766485832 | 765 Count | 809 Count | 639 Count | 0 VDC | 0 VDC |
| 1766485229 | 760 Count | 804 Count | 635 Count | 0 VDC | 0 VDC |
| 1766484023 | 747 Count | 791 Count | 624 Count | 0 VDC | 0 VDC |
| 1766483420 | 742 Count | 786 Count | 620 Count | 0 VDC | 0 VDC |
| 1766482817 | 736 Count | 780 Count | 615 Count | 0 VDC | 0 VDC |
| 1766482214 | 730 Count | 774 Count | 610 Count | 0 VDC | 0 VDC |
| 1766481611 | 725 Count | 769 Count | 606 Count | 0 VDC | 0 VDC |
| 1766481008 | 718 Count | 762 Count | 600 Count | 0 VDC | 0 VDC |
| 1766477497 | 681 Count | 724 Count | 569 Count | 0 VDC | 0 VDC |
| 1766476291 | 669 Count | 711 Count | 559 Count | 0 VDC | 0 VDC |
| 1766475688 | 662 Count | 703 Count | 553 Count | 0 VDC | 0 VDC |
| 1766475085 | 655 Count | 697 Count | 547 Count | 0 VDC | 0 VDC |
| 1766474481 | 649 Count | 690 Count | 542 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)