This is the latest recevied telemetry packets stored in our database for station/object SR9EMP-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762154177 | 94 Count | 830 Count | 60 Count | 4.02 VDC | 0 VDC |
| 1762152376 | 89 Count | 756 Count | 58 Count | 4.02 VDC | 0 VDC |
| 1762150575 | 80 Count | 688 Count | 52 Count | 4.02 VDC | 0 VDC |
| 1762148774 | 75 Count | 620 Count | 50 Count | 4.02 VDC | 0 VDC |
| 1762146974 | 71 Count | 560 Count | 47 Count | 4.01 VDC | 0 VDC |
| 1762145173 | 65 Count | 484 Count | 43 Count | 4.01 VDC | 0 VDC |
| 1762143372 | 48 Count | 381 Count | 30 Count | 4.02 VDC | 0 VDC |
| 1762141571 | 40 Count | 322 Count | 25 Count | 4.01 VDC | 0 VDC |
| 1762139770 | 29 Count | 228 Count | 16 Count | 4.01 VDC | 0 VDC |
| 1762137969 | 23 Count | 172 Count | 12 Count | 4.02 VDC | 0 VDC |
| 1762136169 | 13 Count | 84 Count | 5 Count | 4.01 VDC | 0 VDC |
| 1762134367 | 3 Count | 3 Count | 0 Count | 4.02 VDC | 0 VDC |
| 1762123572 | 56 Count | 517 Count | 34 Count | 4.01 VDC | 0 VDC |
| 1762103772 | 80 Count | 594 Count | 46 Count | 4.02 VDC | 0 VDC |
| 1762098402 | 52 Count | 338 Count | 27 Count | 4.01 VDC | 0 VDC |
| 1762094768 | 32 Count | 176 Count | 16 Count | 4.02 VDC | 0 VDC |
| 1762092966 | 15 Count | 86 Count | 7 Count | 4.02 VDC | 0 VDC |
| 1762089387 | 132 Count | 960 Count | 122 Count | 4.01 VDC | 0 VDC |
| 1762082175 | 176 Count | 1095 Count | 161 Count | 4.02 VDC | 0 VDC |
| 1762078572 | 101 Count | 657 Count | 91 Count | 4.01 VDC | 0 VDC |
| 1762076771 | 66 Count | 440 Count | 59 Count | 4.02 VDC | 0 VDC |
| 1762074970 | 29 Count | 174 Count | 26 Count | 4.02 VDC | 0 VDC |
| 1762073169 | 163 Count | 1027 Count | 142 Count | 4.02 VDC | 0 VDC |
| 1762071364 | 136 Count | 838 Count | 117 Count | 4.02 VDC | 0 VDC |
| 1762069563 | 119 Count | 702 Count | 104 Count | 4.02 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)