This is the latest recevied telemetry packets stored in our database for station/object PE1PNX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762121196 | 254 Count | 301 Count | 135 Count | 0 VDC | 0 VDC |
| 1762119393 | 253 Count | 300 Count | 135 Count | 0 VDC | 0 VDC |
| 1762115786 | 251 Count | 299 Count | 135 Count | 0 VDC | 0 VDC |
| 1762103201 | 240 Count | 296 Count | 135 Count | 0 VDC | 0 VDC |
| 1762101397 | 239 Count | 295 Count | 135 Count | 0 VDC | 0 VDC |
| 1762099594 | 238 Count | 295 Count | 135 Count | 0 VDC | 0 VDC |
| 1762097790 | 237 Count | 293 Count | 135 Count | 0 VDC | 0 VDC |
| 1762095986 | 236 Count | 290 Count | 135 Count | 0 VDC | 0 VDC |
| 1762094183 | 235 Count | 287 Count | 135 Count | 0 VDC | 0 VDC |
| 1762092379 | 234 Count | 282 Count | 135 Count | 0 VDC | 0 VDC |
| 1762086540 | 199 Count | 242 Count | 104 Count | 0 VDC | 0 VDC |
| 1762083361 | 179 Count | 222 Count | 85 Count | 0 VDC | 0 VDC |
| 1762079794 | 169 Count | 214 Count | 81 Count | 0 VDC | 0 VDC |
| 1762077991 | 167 Count | 209 Count | 80 Count | 0 VDC | 0 VDC |
| 1762076187 | 166 Count | 206 Count | 80 Count | 0 VDC | 0 VDC |
| 1762074384 | 165 Count | 205 Count | 80 Count | 0 VDC | 0 VDC |
| 1762072580 | 164 Count | 202 Count | 80 Count | 0 VDC | 0 VDC |
| 1762070776 | 163 Count | 202 Count | 80 Count | 0 VDC | 0 VDC |
| 1762068972 | 162 Count | 199 Count | 80 Count | 0 VDC | 0 VDC |
| 1762067169 | 161 Count | 198 Count | 80 Count | 0 VDC | 0 VDC |
| 1762065365 | 160 Count | 195 Count | 80 Count | 0 VDC | 0 VDC |
| 1762063561 | 159 Count | 193 Count | 80 Count | 0 VDC | 0 VDC |
| 1762061758 | 158 Count | 190 Count | 80 Count | 0 VDC | 0 VDC |
| 1762059995 | 153 Count | 189 Count | 80 Count | 0 VDC | 0 VDC |
| 1762058192 | 152 Count | 186 Count | 80 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)