This is the latest recevied telemetry packets stored in our database for station/object LW2DHT-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779815707 | 535 Count | 598 Count | 415 Count | 0 VDC | 0 VDC |
| 1779813904 | 531 Count | 594 Count | 412 Count | 0 VDC | 0 VDC |
| 1779808536 | 507 Count | 572 Count | 397 Count | 0 VDC | 0 VDC |
| 1779799519 | 485 Count | 544 Count | 380 Count | 0 VDC | 0 VDC |
| 1779745539 | 333 Count | 376 Count | 258 Count | 0 VDC | 0 VDC |
| 1779725702 | 283 Count | 320 Count | 222 Count | 0 VDC | 0 VDC |
| 1779723939 | 278 Count | 314 Count | 218 Count | 0 VDC | 0 VDC |
| 1779722136 | 274 Count | 310 Count | 215 Count | 0 VDC | 0 VDC |
| 1779714922 | 252 Count | 286 Count | 197 Count | 0 VDC | 0 VDC |
| 1779707708 | 233 Count | 264 Count | 182 Count | 0 VDC | 0 VDC |
| 1779704101 | 221 Count | 252 Count | 172 Count | 0 VDC | 0 VDC |
| 1779702349 | 216 Count | 246 Count | 168 Count | 0 VDC | 0 VDC |
| 1779700545 | 211 Count | 241 Count | 164 Count | 0 VDC | 0 VDC |
| 1779698742 | 201 Count | 231 Count | 155 Count | 0 VDC | 0 VDC |
| 1779696939 | 196 Count | 226 Count | 151 Count | 0 VDC | 0 VDC |
| 1779695136 | 191 Count | 221 Count | 147 Count | 0 VDC | 0 VDC |
| 1779693332 | 187 Count | 217 Count | 144 Count | 0 VDC | 0 VDC |
| 1779691529 | 183 Count | 212 Count | 141 Count | 0 VDC | 0 VDC |
| 1779689723 | 178 Count | 207 Count | 137 Count | 0 VDC | 0 VDC |
| 1779687916 | 173 Count | 201 Count | 133 Count | 0 VDC | 0 VDC |
| 1779686109 | 166 Count | 193 Count | 127 Count | 0 VDC | 0 VDC |
| 1779684306 | 163 Count | 189 Count | 125 Count | 0 VDC | 0 VDC |
| 1779682502 | 153 Count | 182 Count | 119 Count | 0 VDC | 0 VDC |
| 1779680739 | 148 Count | 178 Count | 116 Count | 0 VDC | 0 VDC |
| 1779678935 | 143 Count | 173 Count | 112 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)