This is the latest recevied telemetry packets stored in our database for station/object OK1OBR-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762155697 | 741 Count | 509 Count | 348 Count | 0 VDC | 0 VDC |
| 1762153893 | 738 Count | 507 Count | 346 Count | 0 VDC | 0 VDC |
| 1762152089 | 731 Count | 498 Count | 340 Count | 0 VDC | 0 VDC |
| 1762150285 | 730 Count | 498 Count | 340 Count | 0 VDC | 0 VDC |
| 1762148481 | 729 Count | 497 Count | 340 Count | 0 VDC | 0 VDC |
| 1762146725 | 728 Count | 497 Count | 340 Count | 0 VDC | 0 VDC |
| 1762144921 | 727 Count | 497 Count | 340 Count | 0 VDC | 0 VDC |
| 1762143117 | 726 Count | 497 Count | 340 Count | 0 VDC | 0 VDC |
| 1762141314 | 725 Count | 497 Count | 340 Count | 0 VDC | 0 VDC |
| 1762139510 | 722 Count | 495 Count | 338 Count | 0 VDC | 0 VDC |
| 1762137705 | 721 Count | 495 Count | 338 Count | 0 VDC | 0 VDC |
| 1762135901 | 720 Count | 495 Count | 338 Count | 0 VDC | 0 VDC |
| 1762134097 | 719 Count | 495 Count | 338 Count | 0 VDC | 0 VDC |
| 1762132294 | 718 Count | 495 Count | 338 Count | 0 VDC | 0 VDC |
| 1762125123 | 714 Count | 495 Count | 338 Count | 0 VDC | 0 VDC |
| 1762117907 | 710 Count | 493 Count | 338 Count | 0 VDC | 0 VDC |
| 1762116104 | 709 Count | 492 Count | 338 Count | 0 VDC | 0 VDC |
| 1762103523 | 702 Count | 489 Count | 338 Count | 0 VDC | 0 VDC |
| 1762101719 | 701 Count | 489 Count | 338 Count | 0 VDC | 0 VDC |
| 1762099915 | 700 Count | 489 Count | 338 Count | 0 VDC | 0 VDC |
| 1762096307 | 688 Count | 479 Count | 328 Count | 0 VDC | 0 VDC |
| 1762092699 | 686 Count | 478 Count | 328 Count | 0 VDC | 0 VDC |
| 1762090896 | 685 Count | 478 Count | 328 Count | 0 VDC | 0 VDC |
| 1762089092 | 684 Count | 478 Count | 328 Count | 0 VDC | 0 VDC |
| 1762085484 | 682 Count | 478 Count | 328 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)