This is the latest recevied telemetry packets stored in our database for station/object SR2ST-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758202471 | 430 Count | 420 Count | 420 Count | 0 VDC | 0 VDC |
| 1758200790 | 387 Count | 378 Count | 378 Count | 0 VDC | 0 VDC |
| 1758199108 | 353 Count | 345 Count | 345 Count | 0 VDC | 0 VDC |
| 1758197427 | 326 Count | 319 Count | 319 Count | 0 VDC | 0 VDC |
| 1758195745 | 287 Count | 281 Count | 281 Count | 0 VDC | 0 VDC |
| 1758194064 | 268 Count | 263 Count | 263 Count | 0 VDC | 0 VDC |
| 1758192383 | 215 Count | 211 Count | 211 Count | 0 VDC | 0 VDC |
| 1758190702 | 188 Count | 185 Count | 185 Count | 0 VDC | 0 VDC |
| 1758189021 | 137 Count | 135 Count | 135 Count | 0 VDC | 0 VDC |
| 1758187340 | 74 Count | 73 Count | 73 Count | 0 VDC | 0 VDC |
| 1758185659 | 31 Count | 31 Count | 31 Count | 0 VDC | 0 VDC |
| 1758183978 | 1057 Count | 1014 Count | 1014 Count | 0 VDC | 0 VDC |
| 1758182297 | 993 Count | 951 Count | 951 Count | 0 VDC | 0 VDC |
| 1758181170 | 988 Count | 951 Count | 951 Count | 0 VDC | 0 VDC |
| 1758179489 | 948 Count | 912 Count | 912 Count | 0 VDC | 0 VDC |
| 1758177808 | 930 Count | 895 Count | 895 Count | 0 VDC | 0 VDC |
| 1758176127 | 891 Count | 857 Count | 857 Count | 0 VDC | 0 VDC |
| 1758174446 | 832 Count | 799 Count | 799 Count | 0 VDC | 0 VDC |
| 1758172764 | 782 Count | 750 Count | 750 Count | 0 VDC | 0 VDC |
| 1758171084 | 731 Count | 700 Count | 700 Count | 0 VDC | 0 VDC |
| 1758169403 | 710 Count | 680 Count | 680 Count | 0 VDC | 0 VDC |
| 1758167722 | 654 Count | 625 Count | 625 Count | 0 VDC | 0 VDC |
| 1758166293 | 607 Count | 583 Count | 583 Count | 0 VDC | 0 VDC |
| 1758164612 | 563 Count | 540 Count | 540 Count | 0 VDC | 0 VDC |
| 1758162931 | 530 Count | 508 Count | 508 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)