This is the latest recevied telemetry packets stored in our database for station/object EA4ENG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766463183 | 921 Count | 268 Count | 256 Count | 4.12 VDC | 0 VDC |
| 1766459569 | 915 Count | 266 Count | 254 Count | 4.1 VDC | 0 VDC |
| 1766457762 | 912 Count | 265 Count | 253 Count | 4.12 VDC | 0 VDC |
| 1766455955 | 908 Count | 263 Count | 251 Count | 4.12 VDC | 0 VDC |
| 1766430655 | 872 Count | 255 Count | 243 Count | 4.16 VDC | 0 VDC |
| 1766428847 | 870 Count | 255 Count | 243 Count | 4.15 VDC | 0 VDC |
| 1766427040 | 868 Count | 255 Count | 243 Count | 4.17 VDC | 0 VDC |
| 1766423426 | 863 Count | 254 Count | 242 Count | 4.16 VDC | 0 VDC |
| 1766410775 | 848 Count | 252 Count | 241 Count | 4.2 VDC | 0 VDC |
| 1766408968 | 845 Count | 251 Count | 240 Count | 4.22 VDC | 0 VDC |
| 1766407161 | 842 Count | 250 Count | 239 Count | 4.22 VDC | 0 VDC |
| 1766405354 | 839 Count | 249 Count | 238 Count | 4.23 VDC | 0 VDC |
| 1766403547 | 837 Count | 249 Count | 238 Count | 4.2 VDC | 0 VDC |
| 1766401739 | 835 Count | 249 Count | 238 Count | 4.24 VDC | 0 VDC |
| 1766399932 | 833 Count | 249 Count | 238 Count | 4.22 VDC | 0 VDC |
| 1766398123 | 830 Count | 247 Count | 237 Count | 4.25 VDC | 0 VDC |
| 1766396316 | 828 Count | 247 Count | 237 Count | 4.25 VDC | 0 VDC |
| 1766394509 | 826 Count | 247 Count | 237 Count | 4.26 VDC | 0 VDC |
| 1766392701 | 824 Count | 247 Count | 237 Count | 4.27 VDC | 0 VDC |
| 1766390894 | 822 Count | 247 Count | 237 Count | 4.28 VDC | 0 VDC |
| 1766389087 | 819 Count | 246 Count | 236 Count | 4.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)