This is the latest recevied telemetry packets stored in our database for station/object PA3GPU-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766431594 | 139 Count | 914 Count | 0 Count | 0 VDC | 0 VDC |
| 1766427992 | 138 Count | 912 Count | 0 Count | 0 VDC | 0 VDC |
| 1766424389 | 137 Count | 910 Count | 0 Count | 0 VDC | 0 VDC |
| 1766406392 | 132 Count | 895 Count | 0 Count | 0 VDC | 0 VDC |
| 1766402789 | 131 Count | 816 Count | 0 Count | 0 VDC | 0 VDC |
| 1766399186 | 130 Count | 793 Count | 0 Count | 0 VDC | 0 VDC |
| 1766391997 | 128 Count | 789 Count | 0 Count | 0 VDC | 0 VDC |
| 1766388394 | 127 Count | 782 Count | 0 Count | 0 VDC | 0 VDC |
| 1766381188 | 125 Count | 778 Count | 0 Count | 0 VDC | 0 VDC |
| 1766377585 | 124 Count | 776 Count | 0 Count | 0 VDC | 0 VDC |
| 1766373982 | 123 Count | 774 Count | 0 Count | 0 VDC | 0 VDC |
| 1766370993 | 122 Count | 772 Count | 0 Count | 0 VDC | 0 VDC |
| 1766367390 | 121 Count | 767 Count | 0 Count | 0 VDC | 0 VDC |
| 1766363787 | 120 Count | 767 Count | 0 Count | 0 VDC | 0 VDC |
| 1766356581 | 118 Count | 755 Count | 0 Count | 0 VDC | 0 VDC |
| 1766352978 | 117 Count | 753 Count | 0 Count | 0 VDC | 0 VDC |
| 1766348795 | 116 Count | 746 Count | 0 Count | 0 VDC | 0 VDC |
| 1766319989 | 108 Count | 715 Count | 0 Count | 0 VDC | 0 VDC |
| 1766316386 | 107 Count | 713 Count | 0 Count | 0 VDC | 0 VDC |
| 1766312783 | 106 Count | 711 Count | 0 Count | 0 VDC | 0 VDC |
| 1766309180 | 105 Count | 709 Count | 0 Count | 0 VDC | 0 VDC |
| 1766305593 | 104 Count | 707 Count | 0 Count | 0 VDC | 0 VDC |
| 1766301990 | 103 Count | 692 Count | 0 Count | 0 VDC | 0 VDC |
| 1766298387 | 102 Count | 690 Count | 0 Count | 0 VDC | 0 VDC |
| 1766294785 | 101 Count | 684 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)