This is the latest recevied telemetry packets stored in our database for station/object KH6UU-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758400066 | 426 Volts | 627 Deg.F | 283 | 0 | 0 |
| 1758400024 | 429 Volts | 627 Deg.F | 287 | 0 | 0 |
| 1758399980 | 426 Volts | 626 Deg.F | 288 | 0 | 0 |
| 1758399843 | 426 Volts | 626 Deg.F | 285 | 0 | 0 |
| 1758399783 | 428 Volts | 626 Deg.F | 287 | 0 | 0 |
| 1758399481 | 422 Volts | 625 Deg.F | 287 | 0 | 0 |
| 1758399443 | 425 Volts | 624 Deg.F | 285 | 0 | 0 |
| 1758399427 | 425 Volts | 624 Deg.F | 283 | 0 | 0 |
| 1758399366 | 427 Volts | 623 Deg.F | 292 | 0 | 0 |
| 1758399350 | 443 Volts | 622 Deg.F | 293 | 0 | 0 |
| 1758399236 | 455 Volts | 618 Deg.F | 298 | 0 | 0 |
| 1758399229 | 454 Volts | 618 Deg.F | 303 | 0 | 0 |
| 1758399219 | 454 Volts | 618 Deg.F | 308 | 0 | 0 |
| 1758399214 | 455 Volts | 618 Deg.F | 310 | 0 | 0 |
| 1758397224 | 429 Volts | 627 Deg.F | 280 | 0 | 0 |
| 1758397022 | 430 Volts | 625 Deg.F | 289 | 0 | 0 |
| 1758396968 | 429 Volts | 625 Deg.F | 291 | 0 | 0 |
| 1758396960 | 429 Volts | 624 Deg.F | 289 | 0 | 0 |
| 1758396375 | 427 Volts | 620 Deg.F | 291 | 0 | 0 |
| 1758396353 | 428 Volts | 620 Deg.F | 292 | 0 | 0 |
| 1758396163 | 452 Volts | 618 Deg.F | 291 | 0 | 0 |
| 1758395906 | 428 Volts | 613 Deg.F | 296 | 0 | 0 |
| 1758395901 | 426 Volts | 612 Deg.F | 299 | 0 | 0 |
| 1758395896 | 423 Volts | 612 Deg.F | 297 | 0 | 0 |
| 1758395866 | 427 Volts | 611 Deg.F | 304 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)