This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791592190 | 12 Count | 32 Count | 12 Count | 4.11 VDC | 0 VDC |
| 1791577784 | 345 Count | 818 Count | 302 Count | 4.11 VDC | 0 VDC |
| 1791575984 | 336 Count | 794 Count | 294 Count | 4.11 VDC | 0 VDC |
| 1791574183 | 327 Count | 774 Count | 286 Count | 4.11 VDC | 0 VDC |
| 1791570582 | 310 Count | 732 Count | 271 Count | 4.11 VDC | 0 VDC |
| 1791566980 | 288 Count | 680 Count | 251 Count | 4.11 VDC | 0 VDC |
| 1791565180 | 279 Count | 656 Count | 243 Count | 4.11 VDC | 0 VDC |
| 1791563379 | 271 Count | 636 Count | 236 Count | 4.11 VDC | 0 VDC |
| 1791561579 | 263 Count | 617 Count | 229 Count | 4.11 VDC | 0 VDC |
| 1791559778 | 256 Count | 593 Count | 223 Count | 4.11 VDC | 0 VDC |
| 1791552575 | 217 Count | 479 Count | 188 Count | 4.11 VDC | 0 VDC |
| 1791550775 | 213 Count | 465 Count | 185 Count | 4.11 VDC | 0 VDC |
| 1791548974 | 206 Count | 444 Count | 179 Count | 4.11 VDC | 0 VDC |
| 1791547180 | 198 Count | 429 Count | 172 Count | 4.11 VDC | 0 VDC |
| 1791545376 | 187 Count | 407 Count | 162 Count | 4.11 VDC | 0 VDC |
| 1791543572 | 177 Count | 387 Count | 153 Count | 4.11 VDC | 0 VDC |
| 1791541771 | 168 Count | 369 Count | 145 Count | 4.11 VDC | 0 VDC |
| 1791539971 | 156 Count | 346 Count | 134 Count | 4.11 VDC | 0 VDC |
| 1791538181 | 150 Count | 331 Count | 129 Count | 4.1 VDC | 0 VDC |
| 1791536445 | 140 Count | 315 Count | 124 Count | 4.11 VDC | 0 VDC |
| 1791534645 | 132 Count | 295 Count | 117 Count | 4.1 VDC | 0 VDC |
| 1791532843 | 122 Count | 272 Count | 108 Count | 4.11 VDC | 0 VDC |
| 1791531044 | 117 Count | 262 Count | 104 Count | 4.11 VDC | 0 VDC |
| 1791529242 | 113 Count | 256 Count | 101 Count | 4.1 VDC | 0 VDC |
| 1791527443 | 108 Count | 244 Count | 97 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)