This is the latest recevied telemetry packets stored in our database for station/object OK0HCS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762019650 | 39 Count | 992 Count | 0 Count | 0 VDC | 0 VDC |
| 1762017847 | 38 Count | 963 Count | 0 Count | 0 VDC | 0 VDC |
| 1762016078 | 36 Count | 935 Count | 0 Count | 0 VDC | 0 VDC |
| 1762014275 | 35 Count | 882 Count | 0 Count | 0 VDC | 0 VDC |
| 1762012471 | 33 Count | 818 Count | 0 Count | 0 VDC | 0 VDC |
| 1762010668 | 32 Count | 784 Count | 0 Count | 0 VDC | 0 VDC |
| 1762008865 | 30 Count | 727 Count | 0 Count | 0 VDC | 0 VDC |
| 1762007062 | 29 Count | 699 Count | 0 Count | 0 VDC | 0 VDC |
| 1762005261 | 27 Count | 666 Count | 0 Count | 0 VDC | 0 VDC |
| 1762001652 | 24 Count | 597 Count | 0 Count | 0 VDC | 0 VDC |
| 1761999849 | 22 Count | 548 Count | 0 Count | 0 VDC | 0 VDC |
| 1761998046 | 20 Count | 509 Count | 0 Count | 0 VDC | 0 VDC |
| 1761996243 | 19 Count | 451 Count | 0 Count | 0 VDC | 0 VDC |
| 1761994476 | 17 Count | 402 Count | 0 Count | 0 VDC | 0 VDC |
| 1761992673 | 16 Count | 370 Count | 0 Count | 0 VDC | 0 VDC |
| 1761990870 | 14 Count | 326 Count | 0 Count | 0 VDC | 0 VDC |
| 1761989067 | 13 Count | 277 Count | 0 Count | 0 VDC | 0 VDC |
| 1761987264 | 11 Count | 235 Count | 0 Count | 0 VDC | 0 VDC |
| 1761985461 | 10 Count | 193 Count | 0 Count | 0 VDC | 0 VDC |
| 1761983658 | 8 Count | 164 Count | 0 Count | 0 VDC | 0 VDC |
| 1761981855 | 7 Count | 134 Count | 0 Count | 0 VDC | 0 VDC |
| 1761980052 | 5 Count | 104 Count | 0 Count | 0 VDC | 0 VDC |
| 1761978249 | 3 Count | 71 Count | 0 Count | 0 VDC | 0 VDC |
| 1761976446 | 1 Count | 40 Count | 0 Count | 0 VDC | 0 VDC |
| 1761974643 | 0 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)