This is the latest recevied telemetry packets stored in our database for station/object IT9IRS-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791577761 | 82 Count | 152 Count | 62 Count | 0 VDC | 0 VDC |
| 1791577156 | 79 Count | 149 Count | 60 Count | 0 VDC | 0 VDC |
| 1791555117 | 397 Count | 694 Count | 311 Count | 0 VDC | 0 VDC |
| 1791553908 | 392 Count | 666 Count | 308 Count | 0 VDC | 0 VDC |
| 1791553441 | 323 Count | 522 Count | 253 Count | 0 VDC | 0 VDC |
| 1791553163 | 311 Count | 505 Count | 242 Count | 0 VDC | 0 VDC |
| 1791552945 | 303 Count | 494 Count | 235 Count | 0 VDC | 0 VDC |
| 1791552699 | 385 Count | 591 Count | 303 Count | 0 VDC | 0 VDC |
| 1791552093 | 380 Count | 584 Count | 299 Count | 0 VDC | 0 VDC |
| 1791547859 | 347 Count | 548 Count | 273 Count | 0 VDC | 0 VDC |
| 1791545440 | 323 Count | 522 Count | 253 Count | 0 VDC | 0 VDC |
| 1791541811 | 286 Count | 455 Count | 222 Count | 0 VDC | 0 VDC |
| 1791538183 | 260 Count | 417 Count | 202 Count | 0 VDC | 0 VDC |
| 1791536974 | 251 Count | 404 Count | 195 Count | 0 VDC | 0 VDC |
| 1791536369 | 247 Count | 394 Count | 192 Count | 0 VDC | 0 VDC |
| 1791535160 | 241 Count | 370 Count | 188 Count | 0 VDC | 0 VDC |
| 1791534555 | 234 Count | 355 Count | 182 Count | 0 VDC | 0 VDC |
| 1791533950 | 232 Count | 348 Count | 181 Count | 0 VDC | 0 VDC |
| 1791533727 | 223 Count | 343 Count | 177 Count | 0 VDC | 0 VDC |
| 1791533122 | 221 Count | 341 Count | 176 Count | 0 VDC | 0 VDC |
| 1791532518 | 217 Count | 336 Count | 173 Count | 0 VDC | 0 VDC |
| 1791531913 | 213 Count | 330 Count | 170 Count | 0 VDC | 0 VDC |
| 1791531308 | 210 Count | 326 Count | 168 Count | 0 VDC | 0 VDC |
| 1791530704 | 205 Count | 316 Count | 164 Count | 0 VDC | 0 VDC |
| 1791530099 | 199 Count | 292 Count | 159 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)