This is the latest recevied telemetry packets stored in our database for station/object OK1LOL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758084292 | 23 Count | 118 Count | 0 Count | 0 VDC | 0 VDC |
| 1758082489 | 22 Count | 114 Count | 0 Count | 0 VDC | 0 VDC |
| 1758080686 | 21 Count | 109 Count | 0 Count | 0 VDC | 0 VDC |
| 1758078883 | 20 Count | 104 Count | 0 Count | 0 VDC | 0 VDC |
| 1758077080 | 19 Count | 100 Count | 0 Count | 0 VDC | 0 VDC |
| 1758057282 | 8 Count | 47 Count | 0 Count | 0 VDC | 0 VDC |
| 1758055479 | 7 Count | 43 Count | 0 Count | 0 VDC | 0 VDC |
| 1758053676 | 6 Count | 38 Count | 0 Count | 0 VDC | 0 VDC |
| 1758051873 | 5 Count | 33 Count | 0 Count | 0 VDC | 0 VDC |
| 1758050070 | 4 Count | 28 Count | 0 Count | 0 VDC | 0 VDC |
| 1758046464 | 2 Count | 17 Count | 0 Count | 0 VDC | 0 VDC |
| 1758044661 | 1 Count | 9 Count | 0 Count | 0 VDC | 0 VDC |
| 1758017688 | 172 Count | 933 Count | 0 Count | 0 VDC | 0 VDC |
| 1758015885 | 171 Count | 928 Count | 0 Count | 0 VDC | 0 VDC |
| 1758014082 | 170 Count | 923 Count | 0 Count | 0 VDC | 0 VDC |
| 1758012279 | 169 Count | 919 Count | 0 Count | 0 VDC | 0 VDC |
| 1758010476 | 168 Count | 915 Count | 0 Count | 0 VDC | 0 VDC |
| 1758008672 | 167 Count | 911 Count | 0 Count | 0 VDC | 0 VDC |
| 1758006869 | 166 Count | 906 Count | 0 Count | 0 VDC | 0 VDC |
| 1758005066 | 165 Count | 903 Count | 0 Count | 0 VDC | 0 VDC |
| 1758003263 | 164 Count | 899 Count | 0 Count | 0 VDC | 0 VDC |
| 1758001460 | 163 Count | 892 Count | 0 Count | 0 VDC | 0 VDC |
| 1757999657 | 162 Count | 888 Count | 0 Count | 0 VDC | 0 VDC |
| 1757997890 | 161 Count | 884 Count | 0 Count | 0 VDC | 0 VDC |
| 1757996087 | 160 Count | 880 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)