This is the latest recevied telemetry packets stored in our database for station/object SP7TWA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754195238 | 585 Count | 348 Count | 0 Count | 0 VDC | 0 VDC |
| 1754194337 | 584 Count | 347 Count | 0 Count | 0 VDC | 0 VDC |
| 1754193451 | 583 Count | 345 Count | 0 Count | 0 VDC | 0 VDC |
| 1754192551 | 582 Count | 342 Count | 0 Count | 0 VDC | 0 VDC |
| 1754191650 | 581 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754190749 | 580 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754189849 | 579 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754188948 | 578 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754188047 | 577 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754187147 | 576 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754186246 | 575 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754185345 | 574 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754184445 | 573 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754183544 | 572 Count | 340 Count | 0 Count | 0 VDC | 0 VDC |
| 1754182643 | 571 Count | 338 Count | 0 Count | 0 VDC | 0 VDC |
| 1754181742 | 570 Count | 335 Count | 0 Count | 0 VDC | 0 VDC |
| 1754180842 | 569 Count | 331 Count | 0 Count | 0 VDC | 0 VDC |
| 1754179941 | 568 Count | 329 Count | 0 Count | 0 VDC | 0 VDC |
| 1754175438 | 563 Count | 313 Count | 0 Count | 0 VDC | 0 VDC |
| 1754173636 | 561 Count | 307 Count | 0 Count | 0 VDC | 0 VDC |
| 1754172736 | 560 Count | 304 Count | 0 Count | 0 VDC | 0 VDC |
| 1754171851 | 559 Count | 300 Count | 0 Count | 0 VDC | 0 VDC |
| 1754161943 | 548 Count | 286 Count | 0 Count | 0 VDC | 0 VDC |
| 1754161043 | 547 Count | 286 Count | 0 Count | 0 VDC | 0 VDC |
| 1754160142 | 546 Count | 286 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)