This is the latest recevied telemetry packets stored in our database for station/object SP2GSM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1754245141 | 19 Count | 21 Count | 19 Count | 0 VDC | 0 VDC |
| 1754243341 | 826 Count | 1008 Count | 782 Count | 0 VDC | 0 VDC |
| 1754241540 | 806 Count | 985 Count | 763 Count | 0 VDC | 0 VDC |
| 1754239740 | 792 Count | 968 Count | 750 Count | 0 VDC | 0 VDC |
| 1754237939 | 773 Count | 948 Count | 732 Count | 0 VDC | 0 VDC |
| 1754234337 | 736 Count | 904 Count | 697 Count | 0 VDC | 0 VDC |
| 1754228935 | 657 Count | 813 Count | 621 Count | 0 VDC | 0 VDC |
| 1754227135 | 639 Count | 790 Count | 604 Count | 0 VDC | 0 VDC |
| 1754225334 | 621 Count | 769 Count | 587 Count | 0 VDC | 0 VDC |
| 1754223534 | 602 Count | 748 Count | 569 Count | 0 VDC | 0 VDC |
| 1754221733 | 587 Count | 729 Count | 555 Count | 0 VDC | 0 VDC |
| 1754219933 | 569 Count | 708 Count | 538 Count | 0 VDC | 0 VDC |
| 1754218185 | 548 Count | 687 Count | 522 Count | 0 VDC | 0 VDC |
| 1754216384 | 532 Count | 667 Count | 507 Count | 0 VDC | 0 VDC |
| 1754214584 | 514 Count | 644 Count | 490 Count | 0 VDC | 0 VDC |
| 1754212783 | 493 Count | 618 Count | 470 Count | 0 VDC | 0 VDC |
| 1754210983 | 474 Count | 593 Count | 452 Count | 0 VDC | 0 VDC |
| 1754209182 | 457 Count | 572 Count | 436 Count | 0 VDC | 0 VDC |
| 1754207381 | 403 Count | 504 Count | 383 Count | 0 VDC | 0 VDC |
| 1754205581 | 386 Count | 483 Count | 367 Count | 0 VDC | 0 VDC |
| 1754203780 | 363 Count | 456 Count | 345 Count | 0 VDC | 0 VDC |
| 1754201980 | 344 Count | 434 Count | 327 Count | 0 VDC | 0 VDC |
| 1754200179 | 330 Count | 417 Count | 314 Count | 0 VDC | 0 VDC |
| 1754198379 | 313 Count | 394 Count | 298 Count | 0 VDC | 0 VDC |
| 1754196578 | 293 Count | 373 Count | 279 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)