This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766459414 | 266 Count | 191 Count | 174 Count | 4.34 VDC | 0 VDC |
| 1766432389 | 251 Count | 191 Count | 174 Count | 4.33 VDC | 0 VDC |
| 1766430588 | 250 Count | 191 Count | 174 Count | 4.33 VDC | 0 VDC |
| 1766428787 | 248 Count | 189 Count | 173 Count | 4.27 VDC | 0 VDC |
| 1766426986 | 245 Count | 186 Count | 171 Count | 4.31 VDC | 0 VDC |
| 1766425186 | 242 Count | 183 Count | 169 Count | 4.33 VDC | 0 VDC |
| 1766423385 | 239 Count | 180 Count | 167 Count | 4.34 VDC | 0 VDC |
| 1766421584 | 236 Count | 177 Count | 165 Count | 4.32 VDC | 0 VDC |
| 1766410788 | 214 Count | 155 Count | 149 Count | 4.32 VDC | 0 VDC |
| 1766408988 | 211 Count | 152 Count | 147 Count | 4.3 VDC | 0 VDC |
| 1766407187 | 208 Count | 149 Count | 145 Count | 4.31 VDC | 0 VDC |
| 1766405386 | 205 Count | 146 Count | 143 Count | 4.29 VDC | 0 VDC |
| 1766403586 | 202 Count | 143 Count | 141 Count | 4.29 VDC | 0 VDC |
| 1766401785 | 199 Count | 140 Count | 139 Count | 4.33 VDC | 0 VDC |
| 1766399984 | 196 Count | 137 Count | 137 Count | 4.33 VDC | 0 VDC |
| 1766399978 | 201 Count | 142 Count | 142 Count | 4.28 VDC | 0 VDC |
| 1766395873 | 193 Count | 137 Count | 137 Count | 4.28 VDC | 0 VDC |
| 1766392272 | 191 Count | 137 Count | 137 Count | 4.34 VDC | 0 VDC |
| 1766390471 | 190 Count | 137 Count | 137 Count | 4.33 VDC | 0 VDC |
| 1766388679 | 189 Count | 137 Count | 137 Count | 4.32 VDC | 0 VDC |
| 1766386879 | 188 Count | 137 Count | 137 Count | 4.28 VDC | 0 VDC |
| 1766385078 | 187 Count | 137 Count | 137 Count | 4.34 VDC | 0 VDC |
| 1766381476 | 185 Count | 137 Count | 137 Count | 4.33 VDC | 0 VDC |
| 1766379675 | 184 Count | 137 Count | 137 Count | 4.26 VDC | 0 VDC |
| 1766377875 | 183 Count | 137 Count | 137 Count | 4.28 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)