This is the latest recevied telemetry packets stored in our database for station/object M7PDA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1750048354 | 266 Count | 262 Count | 176 Count | 0 VDC | 0 VDC |
| 1750046551 | 263 Count | 259 Count | 174 Count | 0 VDC | 0 VDC |
| 1750044783 | 260 Count | 256 Count | 172 Count | 0 VDC | 0 VDC |
| 1750042980 | 257 Count | 253 Count | 170 Count | 0 VDC | 0 VDC |
| 1750041177 | 254 Count | 250 Count | 168 Count | 0 VDC | 0 VDC |
| 1750039374 | 251 Count | 247 Count | 166 Count | 0 VDC | 0 VDC |
| 1750037571 | 248 Count | 244 Count | 164 Count | 0 VDC | 0 VDC |
| 1750035768 | 245 Count | 241 Count | 162 Count | 0 VDC | 0 VDC |
| 1750033965 | 242 Count | 238 Count | 160 Count | 0 VDC | 0 VDC |
| 1750032162 | 239 Count | 235 Count | 158 Count | 0 VDC | 0 VDC |
| 1750030359 | 236 Count | 232 Count | 156 Count | 0 VDC | 0 VDC |
| 1750014168 | 209 Count | 205 Count | 138 Count | 0 VDC | 0 VDC |
| 1750012364 | 206 Count | 202 Count | 136 Count | 0 VDC | 0 VDC |
| 1750010562 | 201 Count | 197 Count | 132 Count | 0 VDC | 0 VDC |
| 1750008758 | 198 Count | 194 Count | 130 Count | 0 VDC | 0 VDC |
| 1750005152 | 192 Count | 188 Count | 126 Count | 0 VDC | 0 VDC |
| 1750003349 | 189 Count | 185 Count | 124 Count | 0 VDC | 0 VDC |
| 1750001582 | 186 Count | 182 Count | 122 Count | 0 VDC | 0 VDC |
| 1749999779 | 183 Count | 179 Count | 120 Count | 0 VDC | 0 VDC |
| 1749997976 | 180 Count | 176 Count | 118 Count | 0 VDC | 0 VDC |
| 1749996173 | 177 Count | 173 Count | 116 Count | 0 VDC | 0 VDC |
| 1749994370 | 174 Count | 170 Count | 114 Count | 0 VDC | 0 VDC |
| 1749992567 | 171 Count | 167 Count | 112 Count | 0 VDC | 0 VDC |
| 1749990764 | 168 Count | 164 Count | 110 Count | 0 VDC | 0 VDC |
| 1749988960 | 165 Count | 161 Count | 108 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)