This is the latest recevied telemetry packets stored in our database for station/object SQ9PQL-00. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1766460715 | 293 Count | 388 Count | 196 Count | 0 VDC | 0 VDC |
| 1766459811 | 290 Count | 384 Count | 194 Count | 0 VDC | 0 VDC |
| 1766458908 | 287 Count | 380 Count | 192 Count | 0 VDC | 0 VDC |
| 1766458004 | 284 Count | 375 Count | 190 Count | 0 VDC | 0 VDC |
| 1766457100 | 281 Count | 372 Count | 188 Count | 0 VDC | 0 VDC |
| 1766456197 | 278 Count | 368 Count | 186 Count | 0 VDC | 0 VDC |
| 1766455293 | 275 Count | 365 Count | 184 Count | 0 VDC | 0 VDC |
| 1766435501 | 209 Count | 282 Count | 140 Count | 0 VDC | 0 VDC |
| 1766430982 | 194 Count | 261 Count | 130 Count | 0 VDC | 0 VDC |
| 1766430078 | 191 Count | 256 Count | 128 Count | 0 VDC | 0 VDC |
| 1766428270 | 185 Count | 249 Count | 124 Count | 0 VDC | 0 VDC |
| 1766427367 | 182 Count | 246 Count | 122 Count | 0 VDC | 0 VDC |
| 1766424656 | 173 Count | 232 Count | 116 Count | 0 VDC | 0 VDC |
| 1766422935 | 167 Count | 224 Count | 112 Count | 0 VDC | 0 VDC |
| 1766422031 | 164 Count | 220 Count | 110 Count | 0 VDC | 0 VDC |
| 1766421127 | 161 Count | 215 Count | 108 Count | 0 VDC | 0 VDC |
| 1766412094 | 131 Count | 175 Count | 88 Count | 0 VDC | 0 VDC |
| 1766410287 | 125 Count | 167 Count | 84 Count | 0 VDC | 0 VDC |
| 1766407576 | 116 Count | 153 Count | 78 Count | 0 VDC | 0 VDC |
| 1766406672 | 113 Count | 149 Count | 76 Count | 0 VDC | 0 VDC |
| 1766405768 | 110 Count | 145 Count | 74 Count | 0 VDC | 0 VDC |
| 1766404864 | 107 Count | 141 Count | 72 Count | 0 VDC | 0 VDC |
| 1766403961 | 104 Count | 137 Count | 70 Count | 0 VDC | 0 VDC |
| 1766403057 | 101 Count | 132 Count | 68 Count | 0 VDC | 0 VDC |
| 1766402240 | 98 Count | 127 Count | 66 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)