This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762341189 | 479 Count | 466 Count | 256 Count | 4.2 VDC | 0.14 VDC |
| 1762337578 | 469 Count | 456 Count | 250 Count | 4.17 VDC | 0.14 VDC |
| 1762335840 | 456 Count | 445 Count | 243 Count | 4.14 VDC | 0.14 VDC |
| 1762334034 | 446 Count | 435 Count | 235 Count | 4.2 VDC | 0.14 VDC |
| 1762332228 | 439 Count | 428 Count | 230 Count | 4.23 VDC | 0.14 VDC |
| 1762330423 | 432 Count | 420 Count | 225 Count | 4.17 VDC | 0.14 VDC |
| 1762328617 | 427 Count | 415 Count | 222 Count | 4.18 VDC | 0.14 VDC |
| 1762326811 | 419 Count | 407 Count | 216 Count | 4.23 VDC | 0.14 VDC |
| 1762325006 | 404 Count | 390 Count | 203 Count | 4.24 VDC | 0.14 VDC |
| 1762323200 | 399 Count | 385 Count | 200 Count | 4.24 VDC | 0.14 VDC |
| 1762312435 | 348 Count | 335 Count | 165 Count | 4.16 VDC | 0.14 VDC |
| 1762310629 | 343 Count | 330 Count | 162 Count | 4.14 VDC | 0.14 VDC |
| 1762308823 | 338 Count | 325 Count | 159 Count | 4.2 VDC | 0.14 VDC |
| 1762307018 | 331 Count | 318 Count | 154 Count | 4.13 VDC | 0.14 VDC |
| 1762305211 | 324 Count | 312 Count | 149 Count | 4.2 VDC | 0.14 VDC |
| 1762303405 | 319 Count | 307 Count | 146 Count | 4.2 VDC | 0.14 VDC |
| 1762299793 | 302 Count | 290 Count | 133 Count | 4.23 VDC | 0.14 VDC |
| 1762297988 | 297 Count | 285 Count | 130 Count | 4.15 VDC | 0.14 VDC |
| 1762294377 | 283 Count | 272 Count | 120 Count | 4.23 VDC | 0.14 VDC |
| 1762292638 | 274 Count | 266 Count | 117 Count | 4.18 VDC | 0.14 VDC |
| 1762279998 | 254 Count | 246 Count | 111 Count | 4.23 VDC | 0.14 VDC |
| 1762269231 | 232 Count | 226 Count | 105 Count | 4.15 VDC | 0.14 VDC |
| 1762265620 | 226 Count | 220 Count | 103 Count | 4.15 VDC | 0.14 VDC |
| 1762262009 | 220 Count | 214 Count | 101 Count | 4.17 VDC | 0.14 VDC |
| 1762260202 | 217 Count | 211 Count | 100 Count | 4.22 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)