This is the latest recevied telemetry packets stored in our database for station/object KK7LLM-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762304839 | 461 Volts | 622 Deg.F | 313 | 0 | 0 |
| 1762304570 | 472 Volts | 619 Deg.F | 310 | 0 | 0 |
| 1762304337 | 456 Volts | 616 Deg.F | 332 | 0 | 0 |
| 1762304261 | 458 Volts | 615 Deg.F | 322 | 0 | 0 |
| 1762303954 | 463 Volts | 615 Deg.F | 332 | 0 | 0 |
| 1762303702 | 455 Volts | 611 Deg.F | 350 | 0 | 0 |
| 1762303696 | 459 Volts | 611 Deg.F | 351 | 0 | 0 |
| 1762303089 | 470 Volts | 615 Deg.F | 332 | 0 | 0 |
| 1762302847 | 476 Volts | 612 Deg.F | 321 | 0 | 0 |
| 1762302726 | 471 Volts | 607 Deg.F | 319 | 0 | 0 |
| 1762302701 | 471 Volts | 606 Deg.F | 326 | 0 | 0 |
| 1762302510 | 471 Volts | 599 Deg.F | 357 | 0 | 0 |
| 1762275355 | 460 Volts | 618 Deg.F | 334 | 0 | 0 |
| 1762273502 | 462 Volts | 603 Deg.F | 347 | 0 | 0 |
| 1762271425 | 475 Volts | 611 Deg.F | 315 | 0 | 0 |
| 1762271379 | 473 Volts | 610 Deg.F | 325 | 0 | 0 |
| 1762271372 | 471 Volts | 610 Deg.F | 327 | 0 | 0 |
| 1762271364 | 467 Volts | 610 Deg.F | 335 | 0 | 0 |
| 1762271313 | 464 Volts | 610 Deg.F | 328 | 0 | 0 |
| 1762270999 | 451 Volts | 606 Deg.F | 331 | 0 | 0 |
| 1762270282 | 464 Volts | 605 Deg.F | 337 | 0 | 0 |
| 1762269899 | 471 Volts | 599 Deg.F | 329 | 0 | 0 |
| 1762269892 | 469 Volts | 598 Deg.F | 334 | 0 | 0 |
| 1762269883 | 465 Volts | 599 Deg.F | 339 | 0 | 0 |
| 1762269848 | 463 Volts | 598 Deg.F | 348 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 1, 0
Temp: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)