This is the latest recevied telemetry packets stored in our database for station/object SP6OOL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1758486194 | 66 Count | 345 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1758485293 | 65 Count | 344 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1758482591 | 62 Count | 338 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1758481690 | 61 Count | 337 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1758480790 | 60 Count | 336 Count | 0 Count | 4.17 VDC | 0 VDC |
| 1758479889 | 59 Count | 336 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1758478988 | 58 Count | 334 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1758478088 | 57 Count | 334 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1758475401 | 54 Count | 312 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1758474500 | 53 Count | 307 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1758472699 | 51 Count | 294 Count | 0 Count | 4.12 VDC | 0 VDC |
| 1758471798 | 50 Count | 288 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1758470898 | 49 Count | 284 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1758469096 | 47 Count | 273 Count | 0 Count | 4.72 VDC | 0 VDC |
| 1758468196 | 46 Count | 268 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1758467295 | 45 Count | 263 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1758465494 | 43 Count | 236 Count | 0 Count | 4.18 VDC | 0 VDC |
| 1758464593 | 42 Count | 235 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1758463692 | 41 Count | 235 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1758462792 | 40 Count | 234 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1758461891 | 39 Count | 234 Count | 0 Count | 4.22 VDC | 0 VDC |
| 1758460990 | 38 Count | 233 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1758460090 | 37 Count | 233 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1758459189 | 36 Count | 230 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1758458289 | 35 Count | 215 Count | 0 Count | 4.16 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)