This is the latest recevied telemetry packets stored in our database for station/object SQ9PL-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1779816036 | 178 Count | 626 Count | 160 Count | 0 VDC | 0 VDC |
| 1779808833 | 120 Count | 432 Count | 106 Count | 0 VDC | 0 VDC |
| 1779803431 | 83 Count | 312 Count | 72 Count | 0 VDC | 0 VDC |
| 1779798037 | 37 Count | 148 Count | 33 Count | 0 VDC | 0 VDC |
| 1779796236 | 29 Count | 117 Count | 26 Count | 0 VDC | 0 VDC |
| 1779794435 | 22 Count | 85 Count | 20 Count | 0 VDC | 0 VDC |
| 1779783631 | 201 Count | 897 Count | 168 Count | 0 VDC | 0 VDC |
| 1779780029 | 186 Count | 852 Count | 155 Count | 0 VDC | 0 VDC |
| 1779776435 | 166 Count | 807 Count | 142 Count | 0 VDC | 0 VDC |
| 1779774635 | 157 Count | 780 Count | 134 Count | 0 VDC | 0 VDC |
| 1779772834 | 150 Count | 753 Count | 129 Count | 0 VDC | 0 VDC |
| 1779771033 | 142 Count | 724 Count | 122 Count | 0 VDC | 0 VDC |
| 1779765631 | 111 Count | 576 Count | 95 Count | 0 VDC | 0 VDC |
| 1779760229 | 86 Count | 407 Count | 73 Count | 0 VDC | 0 VDC |
| 1779758428 | 75 Count | 348 Count | 63 Count | 0 VDC | 0 VDC |
| 1779754835 | 51 Count | 235 Count | 45 Count | 0 VDC | 0 VDC |
| 1779724230 | 249 Count | 649 Count | 218 Count | 0 VDC | 0 VDC |
| 1779722429 | 236 Count | 621 Count | 206 Count | 0 VDC | 0 VDC |
| 1779717027 | 193 Count | 518 Count | 166 Count | 0 VDC | 0 VDC |
| 1779715226 | 181 Count | 479 Count | 155 Count | 0 VDC | 0 VDC |
| 1779713434 | 171 Count | 442 Count | 150 Count | 0 VDC | 0 VDC |
| 1779711633 | 162 Count | 387 Count | 142 Count | 0 VDC | 0 VDC |
| 1779708031 | 141 Count | 331 Count | 123 Count | 0 VDC | 0 VDC |
| 1779704430 | 116 Count | 262 Count | 100 Count | 0 VDC | 0 VDC |
| 1779702629 | 96 Count | 230 Count | 81 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)