This is the latest recevied telemetry packets stored in our database for station/object SQ9IDT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1761997907 | 156 Count | 669 Count | 139 Count | 0 VDC | 0 VDC |
| 1761989750 | 154 Count | 668 Count | 139 Count | 4.33 VDC | 0 VDC |
| 1761988849 | 144 Count | 626 Count | 130 Count | 4.33 VDC | 0 VDC |
| 1761987949 | 134 Count | 580 Count | 121 Count | 4.32 VDC | 0 VDC |
| 1761987048 | 123 Count | 542 Count | 111 Count | 4.29 VDC | 0 VDC |
| 1761986147 | 114 Count | 506 Count | 103 Count | 4.33 VDC | 0 VDC |
| 1761985247 | 103 Count | 475 Count | 93 Count | 4.29 VDC | 0 VDC |
| 1761984346 | 93 Count | 432 Count | 84 Count | 4.3 VDC | 0 VDC |
| 1761983446 | 83 Count | 388 Count | 75 Count | 4.34 VDC | 0 VDC |
| 1761982545 | 75 Count | 344 Count | 68 Count | 4.3 VDC | 0 VDC |
| 1761981644 | 64 Count | 286 Count | 58 Count | 4.33 VDC | 0 VDC |
| 1761980744 | 55 Count | 224 Count | 50 Count | 4.31 VDC | 0 VDC |
| 1761979877 | 44 Count | 186 Count | 41 Count | 4.33 VDC | 0 VDC |
| 1761978976 | 34 Count | 138 Count | 32 Count | 4.3 VDC | 0 VDC |
| 1761978076 | 21 Count | 93 Count | 20 Count | 4.33 VDC | 0 VDC |
| 1761977175 | 11 Count | 46 Count | 11 Count | 4.31 VDC | 0 VDC |
| 1761976274 | 229 Count | 1028 Count | 202 Count | 4.32 VDC | 0 VDC |
| 1761975373 | 218 Count | 981 Count | 193 Count | 4.34 VDC | 0 VDC |
| 1761974472 | 207 Count | 926 Count | 183 Count | 4.31 VDC | 0 VDC |
| 1761973571 | 197 Count | 880 Count | 174 Count | 4.33 VDC | 0 VDC |
| 1761972671 | 185 Count | 830 Count | 163 Count | 4.3 VDC | 0 VDC |
| 1761971770 | 174 Count | 785 Count | 154 Count | 4.34 VDC | 0 VDC |
| 1761970870 | 165 Count | 745 Count | 146 Count | 4.33 VDC | 0 VDC |
| 1761969969 | 152 Count | 686 Count | 134 Count | 4.34 VDC | 0 VDC |
| 1761969069 | 142 Count | 646 Count | 126 Count | 4.29 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)