This is the latest recevied telemetry packets stored in our database for station/object SP4WSL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791591554 | 39 Count | 59 Count | 38 Count | 0 VDC | 0 VDC |
| 1791578959 | 685 Count | 879 Count | 660 Count | 0 VDC | 0 VDC |
| 1791577158 | 664 Count | 853 Count | 640 Count | 0 VDC | 0 VDC |
| 1791573556 | 622 Count | 803 Count | 600 Count | 0 VDC | 0 VDC |
| 1791569954 | 580 Count | 755 Count | 560 Count | 0 VDC | 0 VDC |
| 1791568153 | 559 Count | 730 Count | 540 Count | 0 VDC | 0 VDC |
| 1791566353 | 538 Count | 705 Count | 520 Count | 0 VDC | 0 VDC |
| 1791564552 | 517 Count | 681 Count | 500 Count | 0 VDC | 0 VDC |
| 1791562773 | 496 Count | 655 Count | 480 Count | 0 VDC | 0 VDC |
| 1791555565 | 365 Count | 495 Count | 353 Count | 0 VDC | 0 VDC |
| 1791548357 | 228 Count | 306 Count | 220 Count | 0 VDC | 0 VDC |
| 1791544754 | 181 Count | 241 Count | 175 Count | 0 VDC | 0 VDC |
| 1791542953 | 160 Count | 214 Count | 155 Count | 0 VDC | 0 VDC |
| 1791541158 | 134 Count | 182 Count | 130 Count | 0 VDC | 0 VDC |
| 1791539358 | 112 Count | 151 Count | 109 Count | 0 VDC | 0 VDC |
| 1791537557 | 92 Count | 123 Count | 90 Count | 0 VDC | 0 VDC |
| 1791535755 | 66 Count | 89 Count | 65 Count | 0 VDC | 0 VDC |
| 1791533955 | 26 Count | 38 Count | 26 Count | 0 VDC | 0 VDC |
| 1791532154 | 780 Count | 1015 Count | 742 Count | 0 VDC | 0 VDC |
| 1791530353 | 760 Count | 987 Count | 723 Count | 0 VDC | 0 VDC |
| 1791528552 | 739 Count | 958 Count | 703 Count | 0 VDC | 0 VDC |
| 1791526752 | 719 Count | 931 Count | 684 Count | 0 VDC | 0 VDC |
| 1791524951 | 685 Count | 880 Count | 651 Count | 0 VDC | 0 VDC |
| 1791523151 | 664 Count | 853 Count | 631 Count | 0 VDC | 0 VDC |
| 1791521350 | 645 Count | 828 Count | 613 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)